Filter
Shopping Options
-
In stockPro Touch Bar 13" (A1706)
- Good Quality Synchronous Buck NexFET™ Power Block MOSFET Pair Controllers IC for MacBooks (CSD58873Q3D / CSD58873D / 58873D, QFN-8 Pin).
- Replace damaged or non-working MOSFET Pair Controllers IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: CSD58873Q3D.
- Printed Numbers: CSD58873D / 58873D
- Pin Numbers: QFN-8 Pin
Synchronous Buck NexFET™ Power Block MOSFET Pair Controllers IC -
In stockPro Touch Bar 13" (A1706)Low-Voltage Translating 16-bit I2C-bus / SMBus I / O Expander With Interrupt Output Reset Registers Controller IC Compatible For Macbook Models (NXP: PCAL6416AHF / L16A: QFN-48 Pin)Low-Voltage Translating 16-bit I2C-bus / SMBus I / O Expander With Interrupt Output Reset Registers Controller IC
-
In stockPro Touch Bar 13" (A1706)
- Best Quality Power Management Controller IC For MacBooks.
- This Power Management Controller IC control the voltage of power rail as well as to regulate voltage to the built-in flash storage.
- If Power Management IC is not working properly then Replace with our best quality Power Management Controller IC for Macbooks.
- Port Marking: FDMF6808N.
- Extra information: 6808N
- Number of Pins: 40 Pins
- We Recommended for Professional Installation.
- Every Part is tested before Shipping.
Power Management Controller IC -
In stockPro Touch Bar 13" (A1706)
- Best Quality Power Management IC For Macbook Pro 13" W/Touch Bar (A1706).
- This Power Management IC control the voltage of power rail as well as to regulate voltage to the built-in flash storage.
- If Power Management IC is not working properly then Replace with our best quality Power Management IC for Macbooks.
- Port Number: U9300/820-00239.
- Number of Pins: BGA 96 Pins
- We Recommended for Professional Installation.
- Every Part is tested before Shipping.
Compatible with :
- Pro 13" W/Touch Bar (A1706 /Late 2016)
Power Management IC -
In stockPro Touch Bar 13" (A1706)
- The ISL9239 IC manages the PBUS Supply power rail & battery charging circuit.
- This might need to be replaced if your logic board isn't getting power from the battery, or if the battery isn't charging while plugged in.
- This IC is identified as APN 353S01016, ISL9239 and U7000 in schematic diagrams and board view software.
- Part Numbers: 353S01016, U7000
- Printed Part Numbers: IISL9239
Compatible with :
- Pro 13 (A1706, Mid 2017 / Late 2016)
- Pro 13 (A1708, Mid 2017 / Late 2016)
- Pro 13 (A1707, Mid 2017 / Late 2016)
PBUS Supply And Battery Charger IC -
Premium
In stockPro Touch Bar 13" (A1706)- High quality Polarizer Film For MacBook Pro 13" W/ Touch Bar Retina (A1706 /A1708 /A1989 / 90°)(Premium)(10 Pack).
- This film helps reduce the reflection of light off the glass and LCD, to let the right combination of colors through.
- Simply put, polarizer film helps reduce the reflection of light off the glass and LCD after installation.
- Similar to the lens of polarized sunglasses, this piece of film does the same job of reducing reflected light and UV rays.
- It is pre-cut and located between the Glass Lens and LCD.
Compatible with :
- Pro 13" W/ Touch Bar Retina (A1706 /A1708 /A1989)
Polarizer Film -
In stockPro Touch Bar 13" (A1706)
- Best quality Overvoltage Protection Relay for the MacBooks (Late 2009-Mid 2017) (MAX9940AXK+: U6900: SC70-5).
- Overvoltage protection is a power supply feature that shuts down the supply, or clamps the output, when the voltage exceeds a preset level.
- If your Overvoltage Protection Relay is not working properly then replace it with our part for Macbook
- All parts tested and working find.
Compatible with :
Overvoltage Protection Relay -
In stockPro Touch Bar 13" (A1706)
- Best quality Keyboard Cable Connector Replacement for MacBook Pro Retina 13" / 15" (40 Pin)
- Replace damaged or non-working Keyboard Cable Connector with this part for Macbook.
- This Connector is used to connect Keyboard to motherboard.
- Pin Number: 40 Pins
- All Parts are made from Best quality materials.
- Ask for Professional Installation.
Compatible with :
- Pro Touch Bar 13" (A1706, Late 2016 / Mid 2017)
- Pro Touch Bar 15" (A1707, Late 2016 / Mid 2017)
- Pro Retina 13" (A1708, Late 2016 / Mid 2017)
Keyboard Cable Connector -
In stock
-
In stockPro Touch Bar 13" (A1706)
- High quality Screen Tester Cable Replacement For MacBook Pro Retina 15" / 13" W/ Touch Bar.
- This Screen Tester Cable is used to check LCD is working or not.
- Replace damage Tester Cable with this part for Macbook Pro Retina 15" / 13" W/ Touch Bar.
- Quality material and precision machining.
- Ask for some technical skills and please be careful with your assembling process.
- Every Part is tested before Shipping.
Compatible with :
- Pro 13" (A2251, Late 2016 to Mid 2020)
- Pro 13" (A2289, Late 2016 to Mid 2020)
- Pro 13" (A2159, Late 2016 to Mid 2020)
- Pro Touch Bar 15" (A1990, Late 2016 to Mid 2020)
- Pro Touch Bar 15" (A1707, Late 2016 to Mid 2020)
- Pro Touch Bar 13" (A1989, Late 2016 to Mid 2020)
- Pro Touch Bar 13" (A1706, Late 2016 to Mid 2020)
- Pro Retina 13" (A1708, Late 2016 to Mid 2020)
Tester Cable (Screen) -
Pull
In stockPro Touch Bar 13" (A1706)- Used OEM Pull Quality Complete LCD Display Assembly For MacBook Pro 13" (A1706 / A1708) (Cosmetic Grade: C) (Space Gray).
- The high resolution advanced Retina Display means that the screen does not show obvious particle, resulting in stunning pictures it shows.
- Replace damage or Cracked Display Assembly with our Replacement Parts for Macbook Pro.
- it’s made from quality material and precision machining. Perfect fit on Macbook Pro.
- Ask for Professional Installation.
- Each item has been checked and in good condition before shipping.
- Part Number: 661-05324, 661-05323, 661-07970, 923-01381
Compatible with :
- Pro Touchbar 13 (A1706, Late 2016 / Mid 2017)
- Pro Retina 13 (A1708, Late 2016 / Mid 2017)
SPACE GRAY
































