Filter
Shopping Options
-
In stock
Pro Touch Bar 13" (A1706)- LCD Display Flex Cable To MotherBoard Screws (Torx T3) (2 pieces set) Compatible For Macbook Pro 13" W/ Touch Bar (A1708 / A2159 / A2289 / A2338 / A1706 / A1707 / A1989 / A1990 / A2251/ Late 2016 to Late 2020) (50 Pack)
- iPhone is a trademark of Apple Inc., registered in the U.S. and other countries and regions.
-
In stock
Pro Touch Bar 13" (A1706)- High quality CPU Fan Screws Torx T5 for Macbook Pro 13".
- These screw will keep hold your fan from flying away.
- The fan is secured to the top case underneath the logic board.
- Replace lost CPU Fan Screws with our best quality product for Macbook.
- Every Part is tested before shipping.
- Part Numbers: 923-01174
- Related Numbers: 923-01168
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017)
CPU Fan Screws (Torx T5) (4 Piece Set) -
In stock
Pro Touch Bar 13" (A1706)- Vent / Antenna Module Screws (Pentalobe P2) For MacBook Pro 13" Retina.
- These screws secure the rear vent and antenna module to the top case.
- If you lost Screws than buy our new Screws set for you Macbook.
- You'll need a Screwdriver with a security bit to install these screws
- Part Numbers: 923-01191
- Printed Numbers: 923-01169
Compatible with :
- Pro 13 Retina (A1708, Late 2016 / Mid 2017)
Vent / Antenna Screws (Pentalobe P2) (12 Piece Set) -
In stock
Pro Touch Bar 13" (A1706)- These screws secure the TCON (Timing controller board) to the display assembly and rear vent.
- We may have a few loose screws, but you don't need to!
- Two screws have shoulders, and are used on the outer ends of the TCON board.
- Part Numbers: 923-01277, 923-01282.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
TCON Board Screws (Torx T4) (4 Piece Set) -
In stock
Pro Touch Bar 13" (A1706)- This is a replacement Bottom Case Screws (Pentalobe P5) For Macbook Pro 13" w/ Touch Bar / Pro 16" (A1706 / A1989 / A2289 / A2251 / A2141) (Space Gray).
- P5 Pentalobe bottom case screws attach bottom case to top case.
- We might have a few screws loose, but your MacBook doesn't need to.
- All parts tested and working just like they were when you bought your MacBook.
- Part Numbers: 923-01413, 923-01415, 923-01096, 923-01431.
Compatible with:
- Pro 13" Touch Bar (A1706, Late 2016 to 2020)
- Pro 13" Touch Bar (A1989, Late 2016 to 2020)
- Pro 13" (A2289, Late 2016 to 2020)
- Pro 13" (A2251, Late 2016 to 2020)
- Pro 16" (A2141, Late 2016 to 2020)
SPACE GRAYBottom Case Screws (Pentalobe P5) -
In stock
Pro Touch Bar 13" (A1706)- These screws secure the trackpad cable cowling to the logic board.
- We may have a few loose screws, but you don't need to!
- Two screws are needed to ensure the cowling stays on properly.
- All parts tested and working just like they were when you bought your MacBook..
- Part Numbers: 923-01281.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
Touchpad Cable Cowling Screw (1 Bracket+2 Screws) (Torx T5) -
In stock
Pro Touch Bar 13" (A1706)- Best quality eDP Cover Screws Upper (Torx T3) for Macbook.
- These screws secure the lower display cable bracket to the rear vent frame.
- Replace lost eDP Cover Screws with our part for Macbook.
- it’s made from quality material and precision machining.
- Part Numbers: 923-01285
- Related Numbers: 923-01310
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017)
eDP Cover Screws (Torx T3) (2 Bracket+6 Screws) -
In stock
Pro Touch Bar 13" (A1706)- Replace a damaged or dead pixel infested touch bar assembly for a Late 2016 to 2019 MacBook Pro 13" with Retina Display, Touch Bar model.
- The display assembly includes the Touch Bar Assembly.
- All parts tested and working just like they were when you bought your MacBook..
Compatible with :
- Pro 13 (A1706, Late 2016).
Touch Bar Assembly -
In stock
Pro Touch Bar 13" (A1706)- This is a replacement bottom case for the MacBook Pro 13 with Touch Bar released in late 2016 / mid 2017 in silver..
- All parts tested and working just like they were when you bought your MacBook.
- Printed Number: 821-00462-06.
-
- Pro 13" W/ Touch Bar (A1706 / Late 2016 / Mid 2017)
SPACE GRAYHeadphone Jack -
In stock
Pro Touch Bar 13" (A1706)- Best quality Power Button Cable for the MacBook Pro 13.
- Power Button Cable is used to turn on/off Macbook.
- Replace damaged or non-working Power Button Cable with our best quality for Macbook
- All parts tested and working fine
Compatible with :
- Pro 13" W/ Touch Bar (A1706 / Late 2016 / Mid 2017)
Power Button Cable -
In stock
Pro Touch Bar 13" (A1706)- Top Quality Heat Sink Brackets Replacement For MacBook Pro 13" W/ Touch Bar.
- Replace the metal spring brackets that press the heat sink against the CPU,
- Quality material and precision machining.
- Professional installation is highly recommended.
- Each item has been checked and in good condition before shipping.
Compatible with :
- Pro 13" (A2289, Late 2016 to Early 2020)
- Pro 13" (A2251, Late 2016 to Early 2020)
- Pro 13" (A1708, Late 2016 to Early 2020)
- Pro Touch Bar 13" (A1706, Late 2016 to Early 2020)
- Pro Retina 13" (A2159, Late 2016 to Early 2020)
Heat Sink Brackets -
In stock
Pro Touch Bar 13" (A1706)- This is a replacement heat sink for the MacBook Pro 13 with Touch Bar.
- Replace a damaged heat sink..
- This part dissipates heat generated by your computer's processors..
- All parts tested and working just like they were when you bought your MacBook..
- Part Numbers: 076-00293
Compatible with :
- Pro 13 (A1706, Late 2016 / Mid 2017).
- Pro 13 (A1989, Late 2018 / Early 2019).
Heat Sink -
In stock
Pro Touch Bar 13" (A1706)- Best Quality Left and Right Fan for Macbook Pro 13 " W/ Touch Bar (A1706 Late 2016/Mid 2017) (A1989 Late 2018 / Early 2019)
- Replace damaged or noisy Left & Right Fan with our best part for Macbook Pro.
- Ask for Professional Installation.
- Part Numbers: 923-02580, 923-02581
- Printed Part Number: MG70040V1-C060-S9A, MG70040V1-C070-S9A
Compatible with :
- Pro 13" W/ Touch Bar (A1706 Late 2016/Mid 2017)
- Pro 13" W/ Touch Bar (A1989 Late 2018 / Early 2019)
Left & Right Fan -
In stock
Pro Touch Bar 13" (A1706)- Replace the elastic plastic gasket that fits around the outside edge of the display assembly for a Late 2016 or 2017 model 13 MacBook Pro with Retina Display..
- All parts tested and working just like they were when you bought your MacBook.
Compatible with :
- Macbook (A1706 /A1708 /A1989 /A2159 /A2289 /A2251 /A1932 /A2179, Late 2016 to Early 2020)
Display Gasket -
In stock
Pro Touch Bar 13" (A1706)- Top Quality Synchronous Buck Regulator IC for MacBooks (INTERSIL,ISL8009BIRZ / ISL8009B / 8009B / 8009 / 09B,QFN-8 Pin).
- Replace damaged or non-working Synchronous Buck Regulator IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: ISL8009BIRZ.
- Printed Numbers: 8009B / 8009 / 09B
- Pin Numbers: QFN-8 Pin
Synchronous Buck Regulator IC -
In stock
Pro Touch Bar 13" (A1706)- High-Quality CPU / GPU Power IC For MacBook Pro Retina 13" / Pro 15"(A1706 / A1707 / A1708:Late 2016 / Mid 2017) (NTERSIL: SL95828HRTZ / ISL95828:U7100: QFN-48 Pin)
- This IC regulates power to the CPU and GPU..
- You might know this part as a buck controller, power management controller, or just plain ol' power chip..
- Part Numbers: 353S00928, U7100
- Printed Part Numbers: ISL95828HRTZ
Compatible with :
- MacBook 12" Retina (A1534, Early 2016 / Mid 2017)
- Air 13 (A1932, Mid 2019 / Late 2018)
- MacBook Pro 13" (A1706, Mid 2017 / Late 2016)
- MacBook Pro 13" (A1708, Mid 2017 / Late 2016)
- MacBook Pro 15" ( A1707, Mid 2017 / Late 2016)
- MacBook Pro 13" (A1989, Mid 2018 / Mid 2019)
- MacBook Pro 15" (A1990, Mid 2018 / Mid 2019)
- MacBook Pro 13" ( A2159)
CPU / GPU Power IC -
In stock
Pro Touch Bar 13" (A1706)- The MAX98300 mono 2.6W Class D amplifier provides Class AB audio performance with Class D efficiency.
- This device offers five selectable gain settings (0dB, 3dB, 6dB, 9dB, and 12dB) set by a single gain-select input (GAIN).
- Active emissions-limiting edge-rate and overshoot control circuitry greatly reduces EMI.
- A filter less spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices. These features reduce application component count.
- The MAX98300 industry-leading 0.78mA at 3.7V (1.1mA at 5V) quiescent current extends battery life in portable applications.
- The MAX98300 is available in an 8-pin TDFN-EP (2mm x 2mm x 0.8mm) and a 9-bump (1.2mm x 1.2mm) WLP.
- Parts Number: U6610
- Printed Number: MAX98300E
Compatible with :
- Pro Unibody 13 (A1278 / Early 2011 / Late 2011 / Mid 2012)
Audio Amplifier IC -
In stock
Pro Touch Bar 13" (A1706)- The ISL6208 is a High Frequency, Dual MOSFET Driver, Optimized to Drive Two N-channel Power MOSFETs in a Synchronous-rectified Buck Converter Topology.
- It is Especially Suited For Mobile Computing Applications That Require High Efficiency And Excellent Thermal Performance.
- This Driver, Combined With an Intersil Multiphase Buck PWM Controller.
- Forms a Complete Single-stage Core-voltage Regulator Solution For Advanced Mobile Microprocessors.
High Voltage Synchronous Rectified Buck MOSFET Controller IC -
In stock
Pro Touch Bar 13" (A1706)- Top Quality Synchronous Power Buck Controller IC for MacBooks (TI, CSD87330Q3D / 87330D / 873300 / 87330Q / 87330, QFN-8 Pin).
- Replace damaged or non-working Synchronous Power Buck Controller IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: CSD87330Q3D.
- Printed Numbers: 87330D
- Pin Numbers: QFN-8 Pin
Synchronous Power Buck Controller IC -
In stock
Pro Touch Bar 13" (A1706)- The TPS720 family of dual rail, low-dropout linear regulators (LDOs) offers outstanding performance (PSRR, load, and line transient response) while consuming a very low quiescent current of 38 µA..
- The TPS720 supports a novel feature in which the output of the LDO regulates under light loads when the IN pin is left floating
- The light-load drive current is sourced from VBIAS under this condition. This feature is particularly useful in power-saving applications where the DC-DC converter connected to the IN pin is disabled but the LDO is still required to regulate the voltage to a light load..
- The TPS720 is stable with ceramic capacitors and uses an advanced BICMOS fabrication process that yields a dropout of 110 mV at a 350-mA output load
- The TPS720 has the unique feature of providing a monotonic VOUT rise (overshoot limited to 3%) with VIN inrush current limited to 100 mA + ILOAD with an output capacitor of 2.2 µF...
- Parts Number: TPS720105DRVR, TPS720105
PMIC Voltage Linear Regulators Controller IC -
In stock
Pro Touch Bar 13" (A1706)- Top Quality TBT Power Support Controller IC for MacBooks (Silego, SLG4AP016VTR / SLG4AP016V (DDM DDF), QFN-8 Pin).
- Replace damaged or non-working TBT Power Support Controller IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: SLG4AP016VTR.
- Information: SLG4AP016V (DDM DDF)
- Pin Numbers: QFN-8 Pin
TBT Power Support Controller IC -
In stock
Pro Touch Bar 13" (A1706)- Top Quality Touchbar FPC Connector for MacBook Pro 13" / 15"W / Touch Bar (A1706 / A1707).
- This Touch Bar FPC Connector is used to connect Touchbar to motherboard.
- Replace damaged or non-working Touchbar FPC Connector with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: J3300 / JB500.
- Board Number: 820-00238 / 820-00923 / 820-00928 / 820-00281
- Pin Numbers: 22 Pins
Compatible with :
- Pro Touchbar 13" (A1706, Late 2016 / Mid 2017)
- Pro Touchbar 15" (A1707, Late 2016 / Mid 2017)
Touchbar FPC Connector -
In stock
Pro Touch Bar 13" (A1706)- The TPS62510 is a high-efficiency step-down converter targeted for operation from a 1.8-V to 3.8-V input voltage rail, ideally suited for 2-cell alkaline or NiMHd applications.
- The TPS62510 is also ideal as a point-of-load regulator running from a fixed 3.3-V, 2.5-V, or 1.8-V input voltage rail
- The converter operates in fixed frequency pulse width modulation (PWM) mode switching at 1.5 MHz with the MODE pin high.
- Pulling the MODE pin low enables the high efficiency mode. In high efficiency mode, the device operates with a 1.5-MHz fixed frequency PWM at nominal load current, and automatically enters the power save mode at light load currents.
DC To DC Converter And Switching Regulator Converter IC -
In stock
Pro Touch Bar 13" (A1706)- Best quality Clock Generator Controller IC for MacBooks (Silego).
- This chip creates the clock signals like SYSCLK_CLK32K_RTC and also the PPVRTC_G3H power rail.
- It is often placed on the corner of the board making it susceptible to liquid damage & death.
- SLG3NB148CV does NOT work with SLG3NB148V or SLG3NB148A - buy the right chip! SLG3NB148V & SLG3NB148A are interchangeable which is what comes if you buy this.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: U2600 / U2700 / U2800.
- Compatible Boards: 820-3023 820-3332 820-3024 820-3208 820-3462 820-3330 820-2915 820-2914 820-3115 820-2936
- Pin Numbers: QFN-16 Pin
PPVRTC_G3H Power & AMP SYSCLK_CLK32K_RTC Clock Generator Controller IC -
In stock
Pro Touch Bar 13" (A1706)- Best quality Clock Generator Controller IC for MacBooks (Silego).
- This chip creates the clock signals like SYSCLK_CLK32K_RTC and also the PPVRTC_G3H power rail.
- It is often placed on the corner of the board making it susceptible to liquid damage & death.
- SLG3NB148CV does NOT work with SLG3NB148V or SLG3NB148A - buy the right chip!
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: U1900.
- Compatible Boards: 820-00165 820-3437 820-3662 820-3787 820-3435 820-00164 820-3476 820-3536 820-4924
- Pin Numbers: QFN-16 Pin
PPVRTC_G3H Power & AMP SYSCLK_CLK32K RTC Clock Generator Controller IC -
In stock
Pro Touch Bar 13" (A1706)- Best quality Clock Generator Controller IC for MacBooks (Silego).
- This chip creates the clock signals like SYSCLK_CLK32K_RTC and also the PPVRTC_G3H power rail.
- It is often placed on the corner of the board making it susceptible to liquid damage & death.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Numbers: SLG3NB149VTR / 3149V
- Pin Numbers: QFN-16 Pin
PPVRTC_G3H Power & AMP SYSCLK_CLK32K_RTC Clock Generator Controller IC -
In stock
Pro Touch Bar 13" (A1706)- It measures the voltage developed across an external sense resistor to represent the high-side current of a battery or voltage regulator.
- It also measures the bus voltage and uses these measured values to present a proportional power calculation.
- The EMC1704 contains additional bidirectional peak detection circuitry to flag instantaneous current spikes with programmable time duration and magnitude threshold.
- Printed Number: SMSC1704-2, EMC1704-2
High-Side Current Sensinsory Temperature Measurement Controller IC
