Filter
Shopping Options
-
In stock
Air 11" (A1370)- Best Quality Power Supply Charging IC Chip For Macbook Air 11" / 13 Pro Retina 13" / 15".
- This Power Supply Charging IC Chip control the Charging voltage.
- If Power Supply Charging IC Chip is not working properly then Replace with our part for Macbooks.
- Part Number: U7000 / U7100.
- Printed Number: INTERSIL,ISL6259 / ISL6259A / ISL6259AHRTZ / 6259AHRTZ
- Number of Pins: QFN-28 Pin
- We Recommended for Professional Installation.
- Every Part is tested before Shipping.
Compatible with :
- Air 11" (A1370, Late 2010 - Mid 2017)
- Air 11" (A1465, Late 2010 - Mid 2017)
- Air 13" (A1369, Late 2010 - Mid 2017)
- Air 13" (A1466, Late 2010 - Mid 2017)
- Pro Retina 13" (A1425, Late 2010 - Mid 2017)
- Pro Retina 13" (A1502, Late 2010 - Mid 2017)
- Pro Retina 15" (A1398, Late 2010 - Mid 2017)
Power Supply Charging IC Chip -
In stock
Air 11" (A1370)- The TPS720 family of dual rail, low-dropout linear regulators (LDOs) offers outstanding performance (PSRR, load, and line transient response) while consuming a very low quiescent current of 38 µA..
- The TPS720 supports a novel feature in which the output of the LDO regulates under light loads when the IN pin is left floating
- The light-load drive current is sourced from VBIAS under this condition. This feature is particularly useful in power-saving applications where the DC-DC converter connected to the IN pin is disabled but the LDO is still required to regulate the voltage to a light load..
- The TPS720 is stable with ceramic capacitors and uses an advanced BICMOS fabrication process that yields a dropout of 110 mV at a 350-mA output load
- The TPS720 has the unique feature of providing a monotonic VOUT rise (overshoot limited to 3%) with VIN inrush current limited to 100 mA + ILOAD with an output capacitor of 2.2 µF...
- Parts Number: TPS720105DRVR, TPS720105
PMIC Voltage Linear Regulators Controller IC -
In stock
Air 11" (A1370)- Top Quality TBT Power Support Controller IC for MacBooks (Silego, SLG4AP016VTR / SLG4AP016V (DDM DDF), QFN-8 Pin).
- Replace damaged or non-working TBT Power Support Controller IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: SLG4AP016VTR.
- Information: SLG4AP016V (DDM DDF)
- Pin Numbers: QFN-8 Pin
TBT Power Support Controller IC -
In stock
Air 11" (A1370)- Good Quality Single Synchronous Buck IC Compatible For MacBook Air 11" / 13" / MacBook Pro Retina 13" / 15"
- Replacement damaged Single Synchronous Buck Controller IC with this part for Macbook.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Compatible with the logic boards: 820-3023 / 820-00165 / 820-3209 / 820-3437 / 820-3662 / 820-3787 / 820-3332 / 820-00138 / 820-3024 / 820-3208 / 820-3435 / 820-00164 / 820-3476 / 820-3536 / 820-4924 / 820-3462 / 820-3330
- Part Numbers: U7501 / U7201
- Number of Pins: QFN-32 Pin
Compatible with :
- Air 11" (A1465, Early 2011-Mid 2015)
- Air 11" (A1370, Early 2011-Mid 2015)
- Air 13" (A1466, Early 2011-Mid 2015)
- Air 13" (A1369, Early 2011-Mid 2015)
- Pro Retina 13" (A1502, Early 2011-Mid 2015)
- Pro Retina 13" (A1425, Early 2011-Mid 2015)
- Pro Retina 15" (A1398, Early 2011-Mid 2015))
Single Synchronous Buck Controller IC -
In stock
Air 11" (A1370)- The TPS62510 is a high-efficiency step-down converter targeted for operation from a 1.8-V to 3.8-V input voltage rail, ideally suited for 2-cell alkaline or NiMHd applications.
- The TPS62510 is also ideal as a point-of-load regulator running from a fixed 3.3-V, 2.5-V, or 1.8-V input voltage rail
- The converter operates in fixed frequency pulse width modulation (PWM) mode switching at 1.5 MHz with the MODE pin high.
- Pulling the MODE pin low enables the high efficiency mode. In high efficiency mode, the device operates with a 1.5-MHz fixed frequency PWM at nominal load current, and automatically enters the power save mode at light load currents.
DC To DC Converter And Switching Regulator Converter IC -
In stock
Air 11" (A1370)- Best quality Clock Generator Controller IC for MacBooks (Silego).
- This chip creates the clock signals like SYSCLK_CLK32K_RTC and also the PPVRTC_G3H power rail.
- It is often placed on the corner of the board making it susceptible to liquid damage & death.
- SLG3NB148CV does NOT work with SLG3NB148V or SLG3NB148A - buy the right chip! SLG3NB148V & SLG3NB148A are interchangeable which is what comes if you buy this.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: U2600 / U2700 / U2800.
- Compatible Boards: 820-3023 820-3332 820-3024 820-3208 820-3462 820-3330 820-2915 820-2914 820-3115 820-2936
- Pin Numbers: QFN-16 Pin
PPVRTC_G3H Power & AMP SYSCLK_CLK32K_RTC Clock Generator Controller IC -
In stock
Air 11" (A1370)- It measures the voltage developed across an external sense resistor to represent the high-side current of a battery or voltage regulator.
- It also measures the bus voltage and uses these measured values to present a proportional power calculation.
- The EMC1704 contains additional bidirectional peak detection circuitry to flag instantaneous current spikes with programmable time duration and magnitude threshold.
- Printed Number: SMSC1704-2, EMC1704-2
High-Side Current Sensinsory Temperature Measurement Controller IC -
In stock
Air 11" (A1370)- Best quality Clock Generator Controller IC for MacBooks (Silego).
- This chip creates the clock signals like SYSCLK_CLK32K_RTC and also the PPVRTC_G3H power rail.
- It is often placed on the corner of the board making it susceptible to liquid damage & death.
- SLG3NB148CV does NOT work with SLG3NB148V or SLG3NB148A - buy the right chip!
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: U1900.
- Compatible Boards: 820-00165 820-3437 820-3662 820-3787 820-3435 820-00164 820-3476 820-3536 820-4924
- Pin Numbers: QFN-16 Pin
PPVRTC_G3H Power & AMP SYSCLK_CLK32K RTC Clock Generator Controller IC -
In stock
Air 11" (A1370)- Best quality Clock Generator Controller IC for MacBooks (Silego).
- This chip creates the clock signals like SYSCLK_CLK32K_RTC and also the PPVRTC_G3H power rail.
- It is often placed on the corner of the board making it susceptible to liquid damage & death.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Numbers: SLG3NB149VTR / 3149V
- Pin Numbers: QFN-16 Pin
PPVRTC_G3H Power & AMP SYSCLK_CLK32K_RTC Clock Generator Controller IC -
In stock
Air 11" (A1370)- Good Quality Synchronous Buck NexFET™ Power Block MOSFET Pair Controllers IC for MacBooks (CSD58873Q3D / CSD58873D / 58873D, QFN-8 Pin).
- Replace damaged or non-working MOSFET Pair Controllers IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: CSD58873Q3D.
- Printed Numbers: CSD58873D / 58873D
- Pin Numbers: QFN-8 Pin
Synchronous Buck NexFET™ Power Block MOSFET Pair Controllers IC -
In stock
Air 11" (A1370)Low-Voltage Translating 16-bit I2C-bus / SMBus I / O Expander With Interrupt Output Reset Registers Controller IC Compatible For Macbook Models (NXP: PCAL6416AHF / L16A: QFN-48 Pin)Low-Voltage Translating 16-bit I2C-bus / SMBus I / O Expander With Interrupt Output Reset Registers Controller IC -
In stock
Air 11" (A1370)- Best Quality Power Management Controller IC For MacBooks.
- This Power Management Controller IC control the voltage of power rail as well as to regulate voltage to the built-in flash storage.
- If Power Management IC is not working properly then Replace with our best quality Power Management Controller IC for Macbooks.
- Port Marking: FDMF6808N.
- Extra information: 6808N
- Number of Pins: 40 Pins
- We Recommended for Professional Installation.
- Every Part is tested before Shipping.
Power Management Controller IC -
In stock
Air 11" (A1370)- Best quality Overvoltage Protection Relay for the MacBooks (Late 2009-Mid 2017) (MAX9940AXK+: U6900: SC70-5).
- Overvoltage protection is a power supply feature that shuts down the supply, or clamps the output, when the voltage exceeds a preset level.
- If your Overvoltage Protection Relay is not working properly then replace it with our part for Macbook
- All parts tested and working find.
Compatible with :
Overvoltage Protection Relay -
In stock
Air 11" (A1370)- This connector can be used for replacing a damaged LCD cable connector on the logic board..
- This connector may be referred to as an LVDS connector or Embedded DisplayPort (eDP) connector, depending on which video standard the device uses..
- This is also the connector on the logic board for attachment of the I/O board data cable in MacBook Pro 15" laptops with model A1398.
- Installation requires the equipment and skills for micro soldering repair.
- Part Numbers: 518S0787, 518S0829
- Printed Part Numbers: 20525-130E-01
Compatible with :
- Air 11 (A1465, Early 2014 / Early 2015 / Mid 2012 / Mid 2013)
- Air 11 (A1466, Early 2014 / Early 2015 / Mid 2012 / Mid 2013 / Mid 2017)
- Pro Unibody 13 (A1278, Mid 2012)
- Pro Retina 13 (A1425, Early 2013 / Late 2012)
- Pro Retina 13 (A1502, Early 2015 / Mid 2014 / Late 2013)
- Pro Retina 15 (A1398, Early 2013 / Mid 2012 / Mid 2014 / Mid 2015 / Late 2013)
-
In stock
Air 11" (A1370)- Connector on the logic board for the attachment of the trackpad..
- All parts tested and working just like they were when you bought your MacBook..
Compatible with :
- Air 11 (A1370, Late 2010/ Mid 2011).
- Air 11 (A1465, Mid 2012).
- Air 13 (A1369, Late 2010/ Mid 2011).
- Air 13 (A1466, Mid 2012).
Trackpad Connector -
In stock
Air 11" (A1370)- This is the LED driver IC for the LCD display backlight and keyboard backlight.
- Can be identified in schematics diagrams and board view files as U7701 or U9701.
- Part Numbers: U7701, U9701
- Printed Part Numbers: LP8550
Compatible with :
- Air 11 (A1370, Mid 2011)
- Air 11 (A1465, Early 2014 / Early 2015 / Mid 2012 / Mid 2013)
- Air 13 (A1369, Mid 2011)
- Air 11 (A1466, Early 2014 / Early 2015 / Mid 2012 / Mid 2013)
- Pro Unibody 13 (A1278, Early 2011 / Mid 2012 / Late 2011)
- Pro Unibody 15 (A1286, Early 2011 / Mid 2012 / Late 2011)
-
In stock
Air 11" (A1370)- High quality Screen Tester Cable Replacement For MacBook Pro Retina 15" / 13" W/ Touch Bar.
- This Screen Tester Cable is used to check LCD is working or not.
- Replace damage Tester Cable with this part for Macbook Pro Retina 15" / 13" W/ Touch Bar.
- Quality material and precision machining.
- Ask for some technical skills and please be careful with your assembling process.
- Every Part is tested before Shipping.
Compatible with :
- Pro 13" (A2251, Late 2016 to Mid 2020)
- Pro 13" (A2289, Late 2016 to Mid 2020)
- Pro 13" (A2159, Late 2016 to Mid 2020)
- Pro Touch Bar 15" (A1990, Late 2016 to Mid 2020)
- Pro Touch Bar 15" (A1707, Late 2016 to Mid 2020)
- Pro Touch Bar 13" (A1989, Late 2016 to Mid 2020)
- Pro Touch Bar 13" (A1706, Late 2016 to Mid 2020)
- Pro Retina 13" (A1708, Late 2016 to Mid 2020)
Tester Cable (Screen) -
Pull
In stock
Air 11" (A1370)- Used OEM Pull Quality Complete LCD Display Assembly For Macbook Air 11" (A1370: Late 2010 / Mid 2011) (Cosmetic Grade: New).
- The high-resolution advanced Retina Display means that the screen does not show obvious particle, resulting in stunning pictures it shows.
- Replace damage or Cracked Display Assembly with our Replacement Part for Macbook Air.
- This Macbook LCD Display from quality material and precision machining. Perfect fit on Macbook Air 11.
- Ask for Professional Installation.
- Each item has been checked and in good condition before shipping.
- Part Number: 661-5732, 661-6056
Compatible with:
- Air 11" (A1370: Late 2010 / Mid 2011)
-
In stock
Air 11" (A1370)- Replace missing or damaged black plastic feet on the lower case of your laptop.
- Compatible with a 13 or 15 Retina Display MacBook Pro model numbers A1706, 11707, and A1708 from Late 2016 and Mid 2017.
- Each set includes four plastic feet.
- All parts tested and working just like they were when you bought your MacBook..
Compatible with :
- Pro 13 (A1706, Late 2016).
Bottom Case Plastic Feet -
In stock
Air 11" (A1370)- High quality Apollo S1 PCle 256GB Solid State Drive
- it uses a non-volatile NAND flash memory providing high performance and outstanding reliability
- Controller SMI
- Transfer Interface PCIeGen3x4
- Transfer Protocols NVMe
- TRIM Support
- 0℃ TO 70℃ Work Temperature
Compatible with :
- Macbook Air 11" (A1370, 2010 - 2011, EMC 2393 / 2471, Macbook Air 3,1 / 4,1)
- Macbook Air 13" (A1369, 2010 - 2011, EMC 2392 / 2469, Macbook Air 3,2 / 4,2)
Apollo S1 256GB Mac SSD (NVMe PCIe Gen3x4) -
In stock
Air 11" (A1370)- High quality Apollo S1 PCle 512GB Solid State Drive
- it uses a non-volatile NAND flash memory providing high performance and outstanding reliability
- Controller SMI
- Transfer Interface PCIeGen3x4
- Transfer Protocols NVMe
- TRIM Support
- 0℃ TO 70℃ Work Temperature
Compatible with :
- Macbook Air 11" (A1370, 2010 - 2011, EMC 2393 / 2471, Macbook Air 3,1 / 4,1)
- Macbook Air 13" (A1369, 2010 - 2011, EMC 2392 / 2469, Macbook Air 3,2 / 4,2)
Apollo S1 512GB Mac SSD (NVMe PCIe Gen3x4) -
Pull
-
In stock
Air 11" (A1370)- This screw is used to secure the AirPort card and solid-state drive to the logic board.
- All parts tested and working just like they were when you bought your MacBook.
- Part Numbers: 922-9651.
Compatible with :
- MacBook Pro 15 Retina (A1370/A1465/A1369/A1425/A1502/A1398/A1466).
AirPort Card / SSD Screw (Torx T5)
