Filter
Shopping Options
-
Pull
In stock
iPhone 12- Used OEM Pull Back Housing W/ Small Pre-Installed Compatible For iPhone 12 (US Version) (Cosmetic Grade: A) (Red).
- Replace damaged or Cracked Back Housing for iPhone 12 with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone 12.
- Every part is tested before shipping.
RedBack Housing W/ Small Components Pre-Installed -
In stock
iPhone 8 Plus- High Quality Motherboard Heat Shield for iPhone 8 Plus (3 Piece Set / 10 Pack).
- Replace damaged Heat Shield with this part for iPhone 8 Plus.
- This shield plate is used to disperse heat and protect your LCD.
- It is made from best quality materials, perfect fit on iPhone 8 Plus.
- We Recommended for Professional Installation.
- Each item has been verified and in good condition before shipping
- Compatible with A1864 / A1897 / A1898 / A1899
Motherboard Heat Shield -
In stock
iPhone 7- Best Quality Antenna Switch IC Chip for iPhone 7 / 7 Plus.
- Antenna Switch IC is used manage your antenna signal.
- Replace damaged Antenna Switch IC Chip for iPhone 7 / 7 Plus with this part.
- We recommended for Professional Installation.
- Port Number: LBDSM_RF
- Port Marking: 289 LT.
- Number of Pins: 21 Pins
- It’s Also called Antenna IC.
Antenna Switch IC Chip -
In stock
Galaxy S8 Plus- Best quality Tester Flex Cable for iTestBox (S300) For Samsung Galaxy S8 Plus.
- Replace damaged Tester Flex Cable for Samsung Galaxy S8 Plus.
- You could use this flex cable connect S300 box to test screens for Samsung Galaxy S8 Plus only
- All Parts are tested before shipping.
- It is made from good quality materials.
Tester Flex Cable -
In stock
iPhone 13 Mini- High quality GPS Antenna Flex Cable Replacement for iPhone 13 Mini (US Version).
- If your phone has faults of on signal, or bad signal, it is most likely the Signal Antenna Cable have some problems.
- It is used to replace your damaged or unusable Replacement Parts Signal Antenna Cable for iPhone 13 Mini.
- Ask for some technical skills and please be careful with your assembling process.
- Each item is tested before shipping.
GPS Antenna Flex Cable -
Out of stock
iPhone 12- Casper Pro Tempered Glass Screen Protector For iPhone 12 / 12 Pro (10 Pack) (Clear).
- 100 % Tempered Glass: Resists scratches from sharp objects.
- Optically transparent once applied.
- Clean and hassle-free installation, no bubbles & no dust.
- If you get dust at installation, no worry wash it off and re-install.
- The only washable tempered glass ever made.
- Each Casper Pro Tempered Glass comes with a set of wipes and dust-removal stickers to ensure a quick, clean and hassle-free installation.
- Compatible with A2341 / A2406 / A2408 / A2407 / A2403 / A2172 / A2402 / A2404
Casper ClearCasper Pro Tempered GlassUS$0.00Out of stock -
Pull
In stock
iPhone 12- Used OEM Pull Back Housing W/ Small Pre-Installed Compatible For iPhone 12 (US Version) (Cosmetic Grade: A) (Green).
- Replace damaged or Cracked Back Housing for iPhone 12 with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone 12.
- Every part is tested before shipping.
GreenBack Housing W/ Small Components Pre-Installed -
Service Pack
In stock
iPhone 11 Pro Max- Top Quality Waterproof LCD Adhesive seal for iPhone 11 Pro Max (Service Pack) (30 Pack).
- This Adhesive seal will save your LCD from water damage, also it is used to hold LCD screen very tight.
- it's made from quality material and premium craftsmanship. Perfect fit on iPhone 11 Pro Max.
- We recommended for professional Installation.
- All Parts are tested before shipping.
- Compatible with A2161 / A2218 / A2220
-
In stock
iPhone 11- Highest quality Back Camera Holding Bracket replacement for iPhone 11.
- This Back facing camera retaining bracket is made of metal.
- This solid Rear Camera Bracket can Hold smartphone Back Camera at his place.
- It is used to replace the broken, missed or out-of-shape rear camera retaining bracket so as to help fasten your camera on the phone tightly.
- Highly recommended for professional installation.
- Compatible with A2221 / A2111 / A2223
Back Camera Holding Bracket -
In stock
iPhone XR- Good Quality Small Bracket on Front Camera for iPhone XR.
- This bracket is used to secure front camera at place.
- Replace damage or lost bracket with our new replacement part for iPhone XR.
- Highly recommended for Professional Installation.
- Compatible with A1984 / A2105 / A2106 / A2107 / A2108
Small Bracket (On Front Camera Plate) -
In stock
iPhone X- Best quality Battery Flex FPC Connector For iPhone X (J3200, 4 Pin).
- This FPC Connector is used to connect Battery and Motherboard.
- Repair/Replace old, damaged and faulty Battery Connector for iPhone X with this replacement Part.
- We recommended for Professional Installation.
- Port Marking: J3200
- Number of Pins: 4
- It’s Also Known as: Battery FPC connector.
- Compatible with A1865 / A1901 / A1902 / A1903
Battery Flex FPC Connector -
In stock
iPhone 8 Plus- High quality 3 in 1 Front Glass with Frame and OCA Pre-Installed for iPhone 8 Plus (Black) (2 Pack) (OCA Master)
- The front glass with frame adds an extra layer of protection on device's screen, safeguarding it against scratches, cracks, and minor impacts.
- With the frame and OCA already in place, the installation process becomes hassle-free, allowing you to quickly and confidently replace your damaged or cracked iPhone 8 Plus screen.
- Each front glass panel is precisely cut and designed to match the dimensions of the specific model, ensuring perfect fit and alignment with the device.
- Crafted with high-quality materials.
- This replacement part offers the same level of durability and visual clarity as the iPhone screen.
- Compatible with A1864 / A1897 / A1898 / A1899
Black3 in 1 (Front Glass + Frame + OCA Pre-Installed) -
In stock
iPhone 6S Plus- Best Quality Backlight Capacitor for iPhone 6S / 6S Plus (10 Pieces)
- If you connect your iPhone 6S / 6S Plus with the USB cable to your wall charger or PC/Mac, you may hear the vibrator turn on and sound and then you have changed the LCD/Glass assembly to make sure it is not your LCD or backlight film and, yet, you still have no screen or dim screen then you most likely have a backlight problem.
- This is the Backlight Capacitor on Board replacement for iPhone 6S / 6S Plus.
- It can be used to replace your got damaged and stopped working backlight Capacitor.
- Ask to professional Installation.
- iPhone 6S / 6S Plus designation: C4023 C4053
- Compatible with A1634 / A1687 / A1690 / A1699 / A1633 / A1688 / A1691 / A1700
Backlight Capacitor -
In stock
iPhone 6 Plus- Top quality Wifi Diplexer for iPhone 6 / 6 Plus.
- Replace damage or non-working Wifi Diplexer with our replacement Part.
- It’s made from a-grade quality materials, Specially design for iPhone 6 / 6 Plus.
- Highly recommended for professional Installation.
WiFi-DIPLEXER -
In stock
Pro Retina 15" (A1398)- This is a replacement heat sink for the Retina MacBook Pro..
- This heatsink sits on top of your CPU and logic board, and retains the heat generated from them.
- This one is compatible with only the discrete graphics configurations.
- All parts tested and working just like they were when you bought your MacBook..
- Part Numbers: 076-1453,076-00083.
Compatible with :
- Pro Retina 15 (A1398,Mid 2015).
Heat Sink -
In stock
iPhone 13 Pro Max- Superior quality Mainboard Inline Insulator Sticker for iPhone 13 Pro Max (4 Piece Set) (10 Pack).
- It can be used to replace your damaged and unusable insulator sticker.
- Strong quality sticker for mainboard.
- It's made from quality material and premium craftsmanship.
- It comes in 10 pack.
- Easy to use.
- Compatible with A2643 / A2484 / A2641 / A2644 / A2645
Mainboard Inline Insulator Sticker -
In stock
iPhone 13 Mini- High quality GPS Antenna Flex Cable Replacement for iPhone 13 Mini (China Version).
- If your phone has faults of on signal, or bad signal, it is most likely the Signal Antenna Cable have some problems.
- It is used to replace your damaged or unusable Replacement Parts Signal Antenna Cable for iPhone 13 Mini.
- Ask for some technical skills and please be careful with your assembling process.
- Each item is tested before shipping.
GPS Antenna Flex Cable -
In stock
iPhone 13- Best quality 5G Module With UW Antenna Flex For iPhone 13
- This easy plugin swap will take care of your poor 5G performance and have you back to enjoying lightning fast speeds in no time.
- Soldering required, simply remove your old module and swap in the new one for a seamless repair.
- This Replacement Part is made from a-one material.
- Every Repair Part is tested before shipping.
- Compatible with A2633 / A2482 / A2631 / A2634 / A2635
5G Module With UW Antenna Flex -
In stock
iPhone 12 Pro Max- This is Complete Screw Set for iPhone 12 Pro Max.
- If you have lost a screw while repairing then you need this set.
- Set Kit includes all screws needed to for repairs on your iPhone.
- Quality material and precision machining.
- Compatible with iPhone 12 Pro Max.
Complete Screw Set -
Out of stock
iPhone 12- Casper Pro Tempered Glass Screen Protector For iPhone 12 / 12 Pro (Case Friendly) (10 Pack) (Clear).
- 100 % Tempered Glass: Resists scratches from sharp objects.
- Optically transparent once applied.
- Clean and hassle-free installation, no bubbles & no dust.
- If you get dust at installation, no worry wash it off and re-install.
- The only washable tempered glass ever made.
- Each Casper Pro Tempered Glass comes with a set of wipes and dust-removal stickers to ensure a quick, clean and hassle-free installation.
- Compatible with A2341 / A2406 / A2408 / A2407 / A2403 / A2172 / A2402 / A2404
Casper ClearCasper Pro Tempered GlassUS$0.00Out of stock -
Pull
In stock
iPhone 12- Used OEM Pull Back Housing W/ Small Components Pre-Installed for iPhone 12 (US Version) (Used OEM Pull: Grade A) (Purple).
- This Back housing comes with pre-installed Small Component.
- Small Components included Power Flex, Volume Flex, NFC Flex and Sim tray.
- This is the best replacement part of damage Back housing for iPhone 12.
- Restore your iPhone 12’s good looks with this affordable replacement.
- Professional Installation required.
PurpleBack Housing W/ Small Components Pre-Installed -
In stock
iPhone 12 Mini- Best quality 5G Nano Signal Cable For iPhone 12 Mini.
- If you are having issues with your service, Wi-Fi, or general connection it may indicate your Nano Signal Cable has become damaged..
- Pick up a new replacement iPhone 12 Mini Nano Signal Cable and return the connection to normal..
- Every Repair Part is tested before shipping.
- Compatible with A2176 / A2398 / A2400 / A2399
5G Nano Signal Cable -
In stock
iPhone 11 Pro Max- High-Quality 3M Glue Adhesive Tape (For Back Glass) For iPhone 11 Pro Max (10 Pack).
- The adhesive is pre-cut to match all the exact shape of the iPhone 11 Pro Max LCD and Touch Screen assembly so that you won't have to waste time measuring, cutting and aligning strips of adhesive.
- Factory-grade 3M adhesive ensures a strong solid bond to your iPhone 11 Pro Max frame.
- Complete your repair like a pro with this clean, quick, affordable way to apply the adhesive your iPhone 11 Pro Max repair will require.
3M Glue Adhesive Tape ( -
In stock
iPhone 11- Best quality LCD Steel Plate with Heat Shield For iPhone 11.
- It is used to reduce the heat from your battery, protect your LCD Screen from damaging.
- Save your time to fix LCD back metal plate.
- It is NOT including LCD display, it is just a metal plate holder.
- Quality material and premium craftsmanship.
- Compatible with A2221 / A2111 / A2223
-
In stock
iPhone X- Best Quality Lattice Projector Face ID FPC Connector For iPhone X (J4530, 18 Pin).
- This FPC Connector is used to connect Lattice Projector Face ID to Motherboard.
- Replace damaged and non-working Lattice Projector Face ID for iPhone X with our best replacement part.
- All Logic Components are tested before shipping.
- iPhone X Designation: J4530
- It’s Also Known as: Face ID FPC connector.
- Compatible with A1921 / A1920 / A1865
Lattice Projector Face ID FPC Connector -
In stock
iPhone XR- Best quality LCD Cable Holding Bracket For iPhone XR.
- This LCD Holding Bracket is used to hold LCD Cable.
- Replace damaged LCD Cable Holding Bracket for iPhone XR with this part
- This Replacement part made from the best material. 100% fit on iPhone XR.
- Highly recommended for Expert installation.
- All Parts are tested before shipping.
- Compatible with A1984 / A2105 / A2106 / A2107 / A2108
-
In stock
iPhone 8 Plus- High quality 3 in 1 Front Glass with Frame and OCA Pre-Installed for iPhone 8 Plus (White) (2 Pack) (OCA Master)
- The front glass with frame adds an extra layer of protection on device's screen, safeguarding it against scratches, cracks, and minor impacts.
- With the frame and OCA already in place, the installation process becomes hassle-free, allowing you to quickly and confidently replace your damaged or cracked iPhone 8 Plus screen.
- Each front glass panel is precisely cut and designed to match the dimensions of the specific model, ensuring perfect fit and alignment with the device.
- Crafted with high-quality materials.
- This replacement part offers the same level of durability and visual clarity as the iPhone screen.
- Compatible with A1864 / A1897 / A1898 / A1899
White3 in 1 (Front Glass + Frame + OCA Pre-Installed) -
In stock
iPhone 7- Best Quality USB Charging NX IC for iPhone 7 / 7 Plus.
- This is the best replacement part of damage and cracked USB Charging NX IC for iPhone 7 / 7 Plus.
- We Recommended for Professional Installation.
- iPhone 7 / 7 Plus Designation: Q2101
- Number of Pins: 9 Pins
- It’s also known as: USB Charging IC.
USB Charging NX IC -
In stock
iPhone 6S Plus- Best Quality Volume Button Flex FPC Connector For iPhone 6s Plus (J4701, 6 Pin).
- Volume FPC Connector is used to connect Volume Button Flex with Motherboard.
- This is perfect replacement part of Damaged and non-working FPC Connector (Volume Button) for iPhone 6S Plus.
- We Recommended for Professional Installation.
- iPhone 6S Plus Designation: J4701
- Number of Pins: 6
- It’s also known as: Volume Button FPC Connector.
- Compatible with A1634 / A1687 / A1699
Volume Button Flex FPC Connector -
In stock
iPhone 6 Plus- Best quality Power supply IC for iPhone 6 / 6 Plus (PM8019).
- This Replacement Part is used to manage unregulated power input and provide regulated output.
- This is the best replacement part of damaged and non-working Power supply IC for iPhone 6 / 6 Plus.
- iPhone 6 / 6 Plus designation: U_PMICRF
- iPhone 6 / 6 Plus Port Marking: PM8019
- iPhone 6 / 6 Plus Pins: 94
- It’s also known as: Power Supply IC Chip.
Power Management PMIC IC -
In stock
Pro Retina 15" (A1398)- This is a replacement heat sink for the Retina MacBook Pro..
- This heatsink sits on top of your CPU and logic board, and retains the heat generated from them.
- This one is compatible with only the discrete graphics configurations.
- All parts tested and working just like they were when you bought your MacBook..
- Part Numbers: 076-1397.
Compatible with :
- Pro Retina 15 (A1398,Mid 2012 / Early 2013).
Heat Sink -
In stock
Galaxy S20 5G- High quality NFC Connector Board for Samsung Galaxy S20.
- This NFC Connector Board is used to Connect with Motherboard.
- Replace damaged NFC Connector Board with this part.
- This Replacement Part is made from quality materials, perfect fit.
- All Parts are quality tested before shipping.
- Compatible with G981
NFC Connector Board -
In stock
iPhone 13- High quality GPS Antenna Flex Cable Replacement for iPhone 13 (US Version).
- If your phone has faults of on signal, or bad signal, it is most likely the Signal Antenna Cable have some problems.
- It is used to replace your damaged or unusable Replacement Parts Signal Antenna Cable for iPhone 13.
- Ask for some technical skills and please be careful with your assembling process.
- Each item is tested before shipping.
GPS Antenna Flex Cable -
Out of stock
iPhone 12- Casper Pro Tempered Glass Screen Protector For iPhone 12 / 12 Pro (10 Pack) (Matte).
- 100 % Tempered Glass: Resists scratches from sharp objects.
- Optically transparent once applied.
- Clean and hassle-free installation, no bubbles & no dust.
- If you get dust at installation, no worry wash it off and re-install.
- The only washable tempered glass ever made.
- Each Casper Pro Tempered Glass comes with a set of wipes and dust-removal stickers to ensure a quick, clean and hassle-free installation.
- Compatible with A2341 / A2406 / A2408 / A2407 / A2403 / A2172 / A2402 / A2404
Casper MatteCasper Pro Tempered GlassUS$0.00Out of stock
