Filter
Shopping Options
-
In stock
iPhone 6S- Top Quality Fingerprint Power Supply IC For iPhone 6S / 6S Plus / 7 / 7 Plus.
- This Fingerprint Power Supply IC is used to manage Power Supply of Fingerprint Scanner.
- If Fingerprint is not working properly or damaged then replace with our high quality Fingerprint Power Supply IC.
- We recommend for professional installation.
- iPhone 6S / 6S Plus designation: U4100
- iPhone 7 / 7 Plus designation: U3801
- Port Marking: LP5907SNX-2.75
- Number of Pins: 5
- It’s also known as: Fingerprint Power Supply IC Chip.
- Compatible with A1633 / A1634 / A1660 / A1661
Fingerprint Power Supply LDO IC -
In stock
iPhone 7 Plus- Small Plastic Ejector Pin For iPhone 7 Plus / 8 Plus.
- This is not a tool. This is a plastic small part within the phone used to push the SIM card tray.
- Every part is tested before shipping.
- Compatible with A1864 / A1897 / A1898 / A1899 / A1661 / A1784 / A1785 / A1786
Sim Tray Ejector Plastic Pin -
In stock
iPhone 8 Plus- Best quality Power Button Retaining Bracket for iPhone 8 Plus.
- 100% new and unused Power button Retaining Bracket.
- This is the best replacement Parts for Damaged and non-working Power Button Retaining Bracket for iPhone 8 Plus.
- This part is tested before Shipping.
- compatible with iPhone 8 Plus.
Power Button Retaining Bracket -
In stock
iPhone 8- Best quality WiFi Antenna Plastic Bracket Replacement for iPhone 8.
- This Wifi Antenna Bracket is made of high quality plastic.
- This Bracket can Hold smartphone Wifi Antenna at his place.
- It is used to replace the broken, missed or out-of-shape Wifi Antenna retaining bracket so as to help fasten your Wifi Antenna on the phone tightly.
- Highly recommended for professional installation.
- Compatible with A1863 / A1905 / A1906 / A1907
WiFi Antenna Plastic Bracket -
In stock
Pro Retina 13" (A1708)- This screw secures the wireless antenna to the logic board.
- We may have a few loose screws, but you don't need to!.
- The antenna is connected to and included with the rear vent module.
- APN: 653-0023, 661-7465, 661-7465, 661-7465, 661-7481.
- PPN: 653-0020, BCM94360CS2.
Compatible with :
- MacBook Pro 13 Retina (A1708, Late 2016 / Mid 2017).
Antenna Screw (Torx T5) -
In stock
Pro Unibody 13" (A1278)- Highest quality Airport Wireless Card Assembly for Macbook Unibody 13.
- This AirPort wireless network card assembly provides wifi and Bluetooth functionality..
- AirPort wireless card assembly includes the AirPort wireless network card, bracket, and flex cable.
- Replace damage Airport wireless card assembly with our Replacement Part for Macbook.
- it’s made from quality material and precision machining.
- Part Numbers: 076-1381, 661-5867, 922-9780
- Printed Number: 821-1312-02, 821-1312-A
Compatible with :
- Pro Unibody 13 (A1278, Early 2011/ Late 2011)
AirPort Wireless Card Assembly -
In stock
Pro Unibody 15" (A1286)- Best quality CPU Fan left for Macbook Pro Unibody 15.
- Keep your MacBook from overheating.
- Left fan is on the left-hand side when facing the screen.
- Replace damage or noisy CPU Left Fan with our part for Macbook.
- it’s made from quality material and precision machining.
- Parts Numbers: 661-4952, 922-8703
- Printed Numbers: KSB0505HB, MG62090V1-Q030-S99
Compatible with :
- Pro Unibody 15 (A1286, Late 2008/ Early 2009/ Mid 2009/ Mid 2010/ Early 2011/ Late 2011/ Mid 2012)
Left Fan -
In stock
iPhone 6S Plus- Backlight With Force Replacements for iPhone 6s Plus.
- Great quality made from durable material with low weight.
- This Backlight fix Dim Screen Problem.
- Excellent to replace your old damaged one.
- Giving the most enjoyable experience.
- Product compatible with iPhone 6s Plus.
- Quality material and premium craftsmanship.
MIRROR REDBacklight With Force Touch -
Premium
In stock
Galaxy Note 10- Top quality Stylus Pen Replacement for Samsung Galaxy Note 10 / Note 10 Plus (Premium) (Aura White).
- Replace non-working or lost stylus pen with our best quality pen.
- Experience lifelike finger-touch simulation with this stylus.
- Effortlessly take notes, draw, edit, and navigate your touch screen.
- This Samsung Galaxy Note 10 Stylus Pen Replacement enhances overall usability and functionality.
- Rigorously tested before shipping to ensure quality.
- Ready to use with no setup needed.
- Compatible with N9700 / N970F / N970F/DS / N970U1 / N970W
Aura WhiteStylus Pen -
Pull
In stock
iPhone XR- Used OEM Pull Back Housing W/ Small Pre-Installed For iPhone XR (Cosmetic Grade: C) (with Logo) (Black).
- Replace damaged or Cracked Back Housing for iPhone XR with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone XR.
- Every part is tested before shipping.
BlackBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 12 Mini- Used OEM Pull Back Housing W/ Small Pre-Installed Compatible For iPhone 12 Mini (US Version) (Cosmetic Grade: C) (Blue).
- Replace damaged or Cracked Back Housing for iPhone 12 Mini with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone 12 Mini.
- Every part is tested before shipping.
BlueBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 13 Pro Max- Used OEM Pull Back Housing W/ Small Components Pre-Installed for iPhone 13 Pro Max (International Version) (Used OEM Pull: Grade B) (Gold).
- This Back housing comes with pre-installed Small Component.
- Small Components included Power Flex, Volume Flex, NFC Flex and Sim tray.
- This is the best replacement part of damage Back housing for iPhone 13 Pro Max.
- Restore your iPhone 13 Pro Max good looks with this affordable replacement.
- It's made with high quality Materials.
- We recommended for Professional Installation
GoldBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 12 Pro- Used OEM Pull Back Housing W/ Small Pre-Installed Compatible For iPhone 12 Pro (International Version) (Cosmetic Grade: B) (Graphite).
- Replace damaged or Cracked Back Housing for iPhone 12 Pro with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone 12 Pro.
- Every part is tested before shipping.
GraphiteBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 12 Pro Max- Used OEM Pull Back Housing W/ Small Pre-Installed Compatible For iPhone 12 Pro Max (International Version) (Cosmetic Grade: A) (Pacific Blue).
- Replace damaged or Cracked Back Housing for iPhone 12 Pro Max with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone 12 Pro Max.
- Every part is tested before shipping.
- Compatible with A2410 / A2412 / A2411
Pacific BlueBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 11- Used OEM Pull Back Housing W/ Small Pre-Installed For iPhone 11 (Cosmetic Grade: B) (with Logo) (Purple).
- Replace damaged or Cracked Back Housing for iPhone 11 with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone 11.
- Every part is tested before shipping.
PurpleBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 14- Superb quality Mid-Frame Housing With Power And Volume Button Compatible For iPhone 14 (US Version) (Used OEM Pull: Grade C) (Purple).
- This Mid-Frame Housing helps hold some of the internal components like Power and Volume Buttons.
- Replace damaged or cracked Mid Frame Housing for iPhone 14 with our replacement Part.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever.
- Every part is tested before shipping.
PurpleMid-Frame Housing With Power And Volume Button -
Pull
In stock
iPhone 13- Best Deal on High quality Back Housing W/ Small Components Pre-Installed for iPhone 13 (Used OEM Pull: Grade C) (Red).
- This Back housing comes with pre-installed Small Component.
- Small Components included Power Flex, Volume Flex, NFC Flex and Sim tray.
- This is the best replacement part of damage Back housing for iPhone 13.
- Restore your iPhone 13’s good looks with this affordable replacement.
- Professional Installation required.
- Compatible with A2633 / A2482 / A2631 / A2634 / A2635
RedBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 14 Plus- Superb quality Mid-Frame Housing Replacement for iPhone 14 Plus (Used OEM Pull: Grade C) (Red).
- This Mid-Frame Housing helps hold some of the internal components like Power and Volume Buttons.
- Replace damaged or cracked Mid Frame Housing for iPhone 14 Plus with our replacement Part.
- Designed for user-friendly installation.
- Made from the finest materials, ensuring long-lasting reliability.
- Every part is tested before shipping.
RedMid-Frame Housing With Power And Volume Button -
Pull
In stock
iPhone 13 Pro- Used OEM Pull Back Housing W/ Small Components Pre-Installed for iPhone 13 Pro (International Version) (Used OEM Pull: Grade B) (Sierra Blue).
- This Back housing comes with pre-installed Small Component.
- Small Components included Power Flex, Volume Flex, NFC Flex and Sim tray.
- This is the best replacement part of damage Back housing for iPhone 13 Pro.
- Restore your iPhone 13 Pro good looks with this affordable replacement.
- It's made with high quality Materials.
- We recommended for Professional Installation
- Compatible with A2638 / A2636 / A2639 / A2640
Sierra BlueBack Housing W/ Small Components Pre-Installed -
In stock
Galaxy Note 9- High-quality LCD Adhesive Tape for Samsung Galaxy Note 9 (10 Pack).
- Replace damaged LCD adhesive tape with our best-quality part.
- This adhesive tape ensures a secure and enduring bond, keeping your phone's LCD screen firmly in place.
- Thanks to its user-friendly design, it allows for a hassle-free replacement of the Samsung Galaxy Note 9's LCD screen.
- Crafted from superior materials, guaranteeing long-lasting reliability.
- Each part undergoes thorough testing before shipping.
- Compatible with N960F / N9600 / N960F / N960U / N960U1 / N960N / N960W / N960X / SCV40
-
In stock
Galaxy S10- Special design High quality Adhesive Back Tape for Samsung Galaxy S10.
- The assistive material makes the phone easier to handle and hold, giving you a much better grip when texting, especially with one hand.
- Quality material and premium craftsmanship.
- Tested before shipping.
- Compatible with G9730 / G973N / G973F / G973U
Back Cover Adhesive Tape -
In stock
Galaxy S10 Plus- This is the high quality Polarizer Film For Samsung Galaxy S10 Plus (10 Pack)
- This film helps reduce the reflection of light off the glass and LCD, to let the right combination of colors through.
- Simply put, polarizer film helps reduce the reflection of light off the glass and LCD after installation.
- Similar to the lens of polarized sunglasses, this piece of film does the same job of reducing reflected light and UV rays.
- It is pre-cut and located between the Glass Lens and LCD.
- Product compatible with Samsung Galaxy S10 Plus.
Polarizer Film -
In stock
Galaxy S20 5G- Best Quality Back Camera Bracket For Samsung Galaxy S20.
- This metal bracket securely holds the Samsung Galaxy S20 rear camera in place..
- We highly recommended for professional Installation.
- All Parts are tested before Shipping.
- Compatible with G980 / G980F / G980F/DS
Back Camera Bracket -
In stock
Galaxy S21 Plus- Best quality Heat Shield Adhesive Tape for Samsung Galaxy S21 Plus (10 Pack).
- This heat shield adhesive tape comes in pack of 10.
- Replace damage Geat shield adhesive tape with our replacement for Samsung Galaxy S21 Plus.
- Every part is factory tested before it is shipped.
- Ask for some technical skills and please be careful with your assembling process.
- Compatible with G996B / G996B/DS / G996U / G996U1 / G996W / G996N / G9960
Heat Shield Adhesive Tape -
In stock
Galaxy S9 Plus- Best quality Heat Shield Adhesive Tape for Samsung Galaxy S9 Plus.
- This heat shield adhesive tape comes in pack of 10.
- Replace damage Geat shield adhesive tape with our replacement for Samsung Galaxy S9 Plus.
- Every part is factory tested before it is shipped.
- Ask for some technical skills and please be careful with your assembling process.
- Compatible with G9650/DS / G965D / G965F / G965F/DS / G965N / G965U / G965W
Heat Shield Adhesive Tape -
In stock
Galaxy S20 FE 5G- Superb quality Dual Sim Card Tray Replacement for Samsung Galaxy S20 FE 5G (Cloud Mint).
- Replace a lost or damaged SIM tray with this high-quality replacement.
- This Samsung Galaxy S20 FE 5G Dual Sim Card Tray Replacement enhances overall usability and functionality.
- Ensures easy insertion of SIM cards into the phone body for optimal connectivity.
- Made from durable materials for long-lasting performance.
- Provides a seamless and hassle-free experience when switching between SIM cards
- Compatible with G7810 / G781B-DS G781U1-DS / G781V / G781W
Cloud MintDual Sim Card Tray -
In stock
iPad Air 4 (2020)- Good quality LCD and digitizer Tester Cable replacement for iPad Air 2.
- An ideal replacement for damaged or non-functional Tester cable.
- This tester cable can check the functionality of LCD and digitizer without device disassembly.
- Save installation time.
- Made with superior quality materials and perfectly fit on specific device..
- Compatible with A2324 / A2072 / A2325 / A2316
-
In stock
iPhone 11 Pro- DL-100 Multi-purpose iPhone Screen Test Board for iPhone 11 Pro / 11 Pro Max.
- Display multiple test pictures to detect display problems.
- When the phone is black, you can light the screen by tapping the screen.
- In the test box black display screen, tap the screen to light the screen to test this function.
- Automatic detection of hardware is good or bad, through the edge line to comprehensively detect the quality of the touch sensor, single point cross detection of any position touch function.
- Can test full-screen pressure at any position, pressure grading test.
- Adjust and view the screen brightness, test the stability of the screen brightness display.
- Repair the original color display of the screen and automatically adjust the brightness data, the new screen is installed after the shell automatically adjusts the brightness and the original color display.
- Compatible with A2218 / A2161 / A2220
DL100 Board -
In stock
iPhone 11 Pro Max- Best quality Wifi and Bluetooth Antenna Cable For iPhone 11 Pro Max.
- Can easily replace your broken, damaged or cracked iPhone 11 Pro Max Loud Speak with this new one.
- This Wifi Flex Cable for iPhone 11 Pro Max will help you repair your wifi antenna problem easily.
- This Wifi cable makes your iPhone 11 Pro Max Work well again.
- With this new replacement, you can get worked well iPhone 11 Pro Max.
- 100% Perfect fit.
WiFi / Bluetooth Antenna Flex Cable -
In stock
iPhone 6 Plus- Top Quality Flash Driver/Boost IC for iPhone 5S / SE /6 / 6 Plus / 6S/ 6S Plus.
- This Stobe/Flash driver/boost IC is play an important role for the Camera Flash light.
- Flash Driver IC is the best replacement of damaged and non-working Flash Driver IC for iPhone 5S /SE/ 6 / 6 Plus / 6S / 6S Plus.
- This Flash Driver IC is automatically handle Flash light during capture photos and videos .
- Highly recommended for Professional Installation.
- iPhone 5S designation: U17
- iPhone 6 / 6+ designation: U1602
- iPhone SE / 6s / 6s+ designation: U3300
- Port Marking: 65DL 64A1
- Number of Pins: 20
- It’s also known as: Flash Driver/Boost IC Chip.
- Compatible with TI LM3564A1TMX
Flash Driver IC -
In stock
iPhone 6S- Best Quality L3602 / L3604 / L3605 For iPhones.
- Replace damaged or non-working coil with our new part.
- We Recommended for Professional Installation.
- All Parts are tested Before shipping
- Compatible with A1634 / A1687 / A1690 / A1699 / A1633 / A1688 / A1691 / A1700
Inductor Coil -
In stock
iPhone 8 Plus- Best quality Charging Port Plastic Bracket For iPhone 8 Plus.
- 100% new and unused Charging Port Plastic Bracket.
- This bracket is hold to Charging Port very tightly.
- This is the best replacement Parts for Damaged and lost Charging port Bracket for iPhone 8 Plus.
- It’s made from high quality materials.
- Compatible with A1864 / A1897 / A1898 / A1899
Charging Port Plastic Bracket -
In stock
iPhone SE (2020)- Super quality Capacitor for iPhone SE (C2411).
- This capacitor is the power supply filter.
- Repair/Replace old, damaged and faulty Capacitor for iPhone SE with this replacement Part.
- We recommended for Professional Installation.
- Details: C2411
- It’s Also Known as: Capacitor for iPhone.
Capacitor -
In stock
iPhone XS
- Best quality Liquid indicator sticker on the LCD For iPhone XS.
- This sticker used to check liquid damage from your LCD screen.
- It comes in pack of 20.
- You can easily use on iPhone XS.
- Every Part is tested before Shipping.
- Compatible with A1921 / A2101 / A2102 / A2103 / A2104 / A1920 / A1997 / A2098 / A2097 / A2100
-
In stock
iPhone XS Max- high quality Vibrator Motor for iPhone XS Max.
- If your vibrator stopped working on your phone and does not vibrate anymore then replace this part.
- This uses a rotating motor with counter weight vibrator.
- We Recommended for Professional Installation.
- Compatible with A1921 / A2101 / A2102 / A2103 / A2104
- Every Part is tested before shipping
Vibrator -
In stock
Pro Retina 13" (A1708)- These screws secure the left speaker to the top case.
- We may have a few loose screws, but you don't need to!
- Each screw includes a standoff that ensures the speaker is seated correctly to the top case.
- Part Numbers: 923-01178, 923-01302.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
Left Speaker Screws W/ Standoffs (Torx T5) -
In stock
Pro Touch Bar 13" (A1706)- Replace a damaged or dead pixel infested touch bar assembly for a Late 2016 to 2019 MacBook Pro 13" with Retina Display, Touch Bar model.
- The display assembly includes the Touch Bar Assembly.
- All parts tested and working just like they were when you bought your MacBook..
Compatible with :
- Pro 13 (A1706, Late 2016).
Touch Bar Assembly -
In stock
Pro Unibody 13" (A1278)- Is your CPU running hot and out of control? You might need a new heatsink.
- An overheating CPU can cause your whole computer to run slowly, or worse!
- Heatsinks are extremely specific to certain models, please verify compatibility with your MacBook!
- All parts tested and working just like they were when you bought your MacBook..
- Part Numbers: 922-9446.
Compatible with :
- Unibody 13 (A1278, Mid 2010).
Heatsink -
In stock
Pro Unibody 15" (A1286)- CPU Fan for Macbook Pro Unibody 15.
- This fan is used to keep your Macbook cool.
- Replace damage or non-working CPU Fan with our part for Macbook.
- it’s made from quality material and precision machining.
- Parts Numbers: 661-5043, 922-9294
- Printed Numbers: KSB0605HC, MG45070V1-Q010-S99
Compatible with :
- Pro Unibody 15 (A1286, Mid 2009)
CPU Fan -
Premium
In stock
Galaxy Note 10- Top quality Stylus Pen Replacement for Samsung Galaxy Note 10 / Note 10 Plus (Premium) (Aura Glow / Silver).
- Replace non-working or lost stylus pen with our best quality pen.
- Experience lifelike finger-touch simulation with this stylus.
- Effortlessly take notes, draw, edit, and navigate your touch screen.
- This Samsung Galaxy Note 10 Stylus Pen Replacement enhances overall usability and functionality.
- Rigorously tested before shipping to ensure quality.
- Ready to use with no setup needed.
- Compatible with N9700 / N970F / N970F/DS / N970U1 / N970W
Aura GlowStylus Pen -
Pull
In stock
iPhone 12 Mini- Used OEM Pull Back Housing W/ Small Pre-Installed Compatible For iPhone 12 MINI (US Version) (Used OEM Pull, Cosmetic Grade: C) (Black).
- Replace damaged or Cracked Back Housing for iPhone 12 MINI with our replacement Part.
- This back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone 12 MINI.
- Every part is tested before shipping.
- Compatible with A2176 / A2398 / A2400 / A2399
BlackBack Housing W/ Small Components Pre-Installed -
Pull
In stock
iPhone 14 Plus- Superb quality Mid-Frame Housing With Power And Volume Button Compatible For iPhone 14 Plus (US Version) (Used OEM Pull: Grade C) (Blue).
- This Mid-Frame Housing helps hold some of the internal components like Power and Volume Buttons.
- Replace damaged or cracked Mid Frame Housing for iPhone 14 Plus with our replacement Part.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever.
- Every part is tested before shipping.
BlueMid-Frame Housing With Power And Volume Button -
Pull
In stock
iPhone XR- Used OEM Pull Back Housing W/ Small Pre-Installed Compatible For iPhone XR (Cosmetic Grade: C) (Coral).
- Replace damaged or Cracked Back Housing for iPhone XR with our replacement Part.
- this back cover has small components that come with it as well (SIM Card Tray, Power, Volume, and Switch Covers, Rear Camera Lens Cover, and the NFC).
- Using this Back Housing you can protect your battery from damage.
- We recommended for Professional Installation
- Makes your device look more refreshing than ever. Specially design for iPhone XR.
- Every part is tested before shipping.
CORALBack Housing W/ Small Components Pre-Installed
