Filter
Shopping Options
-
In stock
Pro Retina 13" (A1708)- These screws secure the spring tensioner to the display to the rear wall.
- We may have a few loose screws, but you don't need to!
- These screws help your display open smoothly.
- Part Numbers: 923-01185.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
Spring Tensioner Screws (Torx T3) (4 Piece Set) -
In stock
Pro Retina 13" (A1708)- These screws secure the logic board to the top case.
- We may have a few loose screws, but you don't need to!
- The shorter screw goes in the top left corner near the fan and rear vent.
- Part Numbers: 923-01176, 923-01180.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
Logic Board Screws (Torx T5) (4 Piece Set) -
In stock
Pro Retina 13" (A1708)- Top Quality Display Clutch Cover Screws Torx T3 for Macbook Pro 13.
- These screws secure the plastic clutch covers in place.
- These screws will work for the left or right side clutch cover.
- Replace lost Display Clutch Cover Screws Torx T3 with our best quality product for Macbook.
- it’s made from quality material and precision machining.
- Parts Numbers: 923-01286
- Related Numbers: 923-01445, 923-01286
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017)
Clutch Cover Screws (Torx T3) (4 Piece Set) -
In stock
Pro Retina 13" (A1708)- LCD Display Flex Cable Bracket Screws (Torx T3) (2 pieces set) Compatible For Macbook Pro 13" W/ Touch Bar (A1708 / A2159 / A2289 / A2338 / A1706 / A1707 / A1989 / A1990 / A2251/ Late 2016 to Late 2020) (50 Pack)
- iPhone is a trademark of Apple Inc., registered in the U.S. and other countries and regions.
-
In stock
Pro Retina 13" (A1708)- LCD Display Flex Cable To MotherBoard Screws (Torx T3) (2 pieces set) Compatible For Macbook Pro 13" W/ Touch Bar (A1708 / A2159 / A2289 / A2338 / A1706 / A1707 / A1989 / A1990 / A2251/ Late 2016 to Late 2020) (50 Pack)
- iPhone is a trademark of Apple Inc., registered in the U.S. and other countries and regions.
-
In stock
Pro Retina 13" (A1708)- High quality CPU Fan Screws Torx T5 for Macbook Pro 13".
- These screw will keep hold your fan from flying away.
- The fan is secured to the top case underneath the logic board.
- Replace lost CPU Fan Screws with our best quality product for Macbook.
- Every Part is tested before shipping.
- Part Numbers: 923-01174
- Related Numbers: 923-01168
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017)
CPU Fan Screws (Torx T5) (4 Piece Set) -
In stock
Pro Retina 13" (A1708)- Vent / Antenna Module Screws (Pentalobe P2) For MacBook Pro 13" Retina.
- These screws secure the rear vent and antenna module to the top case.
- If you lost Screws than buy our new Screws set for you Macbook.
- You'll need a Screwdriver with a security bit to install these screws
- Part Numbers: 923-01191
- Printed Numbers: 923-01169
Compatible with :
- Pro 13 Retina (A1708, Late 2016 / Mid 2017)
Vent / Antenna Screws (Pentalobe P2) (12 Piece Set) -
In stock
Pro Retina 13" (A1708)- These screws secure the TCON (Timing controller board) to the display assembly and rear vent.
- We may have a few loose screws, but you don't need to!
- Two screws have shoulders, and are used on the outer ends of the TCON board.
- Part Numbers: 923-01277, 923-01282.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
TCON Board Screws (Torx T4) (4 Piece Set) -
In stock
Pro Retina 13" (A1708)- These screws secure the audio flex cable bracket in place.
- We may have a few loose screws, but you don't need to!
- The screws are different lengths, so make sure you pick the right one when installing the bracket.
- The longer screw goes on the side closest to the rear of the computer.
- Parts Number: 923-01177, 923-01277.
- Printed Number: 923-01296.
Compatible with :
- MacBook Pro 13 Retina (A1708, Late 2016 / Mid 2017).
Audio Flex Cable Bracket Screws (Torx T5) -
In stock
Pro Retina 13" (A1708)- These screws secure the SSD (Flash storage) to the logic board.
- We may have a few loose screws, but you don't need to!
- Securing your SSD with these screws will ensure it maintains a good connection to the logic board.
- Part Numbers: 923-01182.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
SSD Screw (Torx T5) -
In stock
Pro Retina 13" (A1708)- This screw secures the wireless antenna to the logic board.
- We may have a few loose screws, but you don't need to!.
- The antenna is connected to and included with the rear vent module.
- APN: 653-0023, 661-7465, 661-7465, 661-7465, 661-7481.
- PPN: 653-0020, BCM94360CS2.
Compatible with :
- MacBook Pro 13 Retina (A1708, Late 2016 / Mid 2017).
Antenna Screw (Torx T5) -
In stock
Pro Retina 13" (A1708)- These screws secure the left speaker to the top case.
- We may have a few loose screws, but you don't need to!
- Each screw includes a standoff that ensures the speaker is seated correctly to the top case.
- Part Numbers: 923-01178, 923-01302.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
Left Speaker Screws W/ Standoffs (Torx T5) -
In stock
Pro Retina 13" (A1708)- This is a replacement Bottom Case Screws (Pentalobe P5) For MacBook Pro 13" Retina (A1708)(Silver).
- P5 Pentalobe bottom case screws attach bottom case to top case.
- We might have a few screws loose, but your MacBook doesn't need to.
- All parts tested and working just like they were when you bought your MacBook.
- Part Numbers: 923-01095, 923-01097, 923-01299.
- Related PN : 923-01128
Compatible with :
- Pro 13" Retina (A1708 / Late 2016 / Mid 2017).
SilverBottom Case Screws (Pentalobe P5) -
In stock
Pro Retina 13" (A1708)- Best quality Bottom Case Screws (Pentalobe P5) for Macbook Pro 13".
- P5 Pentalobe bottom case screws attach bottom case to top case.
- Replace damage or lost Bottom Case Screws with our part for Macbook.
- it’s made from quality material and precision machining.
- The short screws go in the middle front of the bottom case, The medium length screws go in the front corners, The long screws go in the rear corners.
- Parts Numbers: 923-01095, 923-01097, 923-01299
- Related Numbers: 923-01128
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017)
GrayBottom Case Screws (Pentalobe P5) -
In stock
Pro Retina 13" (A1708)- These screws secure the trackpad cable cowling to the logic board.
- We may have a few loose screws, but you don't need to!
- Two screws are needed to ensure the cowling stays on properly.
- All parts tested and working just like they were when you bought your MacBook..
- Part Numbers: 923-01281.
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017).
Touchpad Cable Cowling Screw (1 Bracket+2 Screws) (Torx T5) -
In stock
Pro Retina 13" (A1708)- Best quality eDP Cover Screws Upper (Torx T3) for Macbook.
- These screws secure the lower display cable bracket to the rear vent frame.
- Replace lost eDP Cover Screws with our part for Macbook.
- it’s made from quality material and precision machining.
- Part Numbers: 923-01285
- Related Numbers: 923-01310
Compatible with :
- Pro 13 (A1708, Late 2016/ Mid 2017)
eDP Cover Screws (Torx T3) (2 Bracket+6 Screws) -
In stock
Pro Retina 13" (A1708)- Best quality Display Clutch Cover Left for Macbook Pro Retina 13.
- Display hinge clutch cover on the left side.
- Replace damage Display Clutch Cover with our part for Macbook.
- it’s made from quality material and precision machining.
- Parts Numbers: 923-01446
- Related Numbers: 923-01445
Compatible with :
- Pro Retina 13 (A1708, Late 2016/ Mid 2017)
Left+Right Display Clutch Cover -
In stock
Pro Retina 13" (A1708)- Top Quality Heat Sink Brackets Replacement For MacBook Pro 13" W/ Touch Bar.
- Replace the metal spring brackets that press the heat sink against the CPU,
- Quality material and precision machining.
- Professional installation is highly recommended.
- Each item has been checked and in good condition before shipping.
Compatible with :
- Pro 13" (A2289, Late 2016 to Early 2020)
- Pro 13" (A2251, Late 2016 to Early 2020)
- Pro 13" (A1708, Late 2016 to Early 2020)
- Pro Touch Bar 13" (A1706, Late 2016 to Early 2020)
- Pro Retina 13" (A2159, Late 2016 to Early 2020)
Heat Sink Brackets -
In stock
Pro Retina 13" (A1708)- Replace the elastic plastic gasket that fits around the outside edge of the display assembly for a Late 2016 or 2017 model 13 MacBook Pro with Retina Display..
- All parts tested and working just like they were when you bought your MacBook.
Compatible with :
- Macbook (A1706 /A1708 /A1989 /A2159 /A2289 /A2251 /A1932 /A2179, Late 2016 to Early 2020)
Display Gasket -
In stock
Pro Retina 13" (A1708)- Top Quality Synchronous Buck Regulator IC for MacBooks (INTERSIL,ISL8009BIRZ / ISL8009B / 8009B / 8009 / 09B,QFN-8 Pin).
- Replace damaged or non-working Synchronous Buck Regulator IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: ISL8009BIRZ.
- Printed Numbers: 8009B / 8009 / 09B
- Pin Numbers: QFN-8 Pin
Synchronous Buck Regulator IC -
In stock
Pro Retina 13" (A1708)- High-Quality CPU / GPU Power IC For MacBook Pro Retina 13" / Pro 15"(A1706 / A1707 / A1708:Late 2016 / Mid 2017) (NTERSIL: SL95828HRTZ / ISL95828:U7100: QFN-48 Pin)
- This IC regulates power to the CPU and GPU..
- You might know this part as a buck controller, power management controller, or just plain ol' power chip..
- Part Numbers: 353S00928, U7100
- Printed Part Numbers: ISL95828HRTZ
Compatible with :
- MacBook 12" Retina (A1534, Early 2016 / Mid 2017)
- Air 13 (A1932, Mid 2019 / Late 2018)
- MacBook Pro 13" (A1706, Mid 2017 / Late 2016)
- MacBook Pro 13" (A1708, Mid 2017 / Late 2016)
- MacBook Pro 15" ( A1707, Mid 2017 / Late 2016)
- MacBook Pro 13" (A1989, Mid 2018 / Mid 2019)
- MacBook Pro 15" (A1990, Mid 2018 / Mid 2019)
- MacBook Pro 13" ( A2159)
CPU / GPU Power IC -
In stock
Pro Retina 13" (A1708)- The MAX98300 mono 2.6W Class D amplifier provides Class AB audio performance with Class D efficiency.
- This device offers five selectable gain settings (0dB, 3dB, 6dB, 9dB, and 12dB) set by a single gain-select input (GAIN).
- Active emissions-limiting edge-rate and overshoot control circuitry greatly reduces EMI.
- A filter less spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices. These features reduce application component count.
- The MAX98300 industry-leading 0.78mA at 3.7V (1.1mA at 5V) quiescent current extends battery life in portable applications.
- The MAX98300 is available in an 8-pin TDFN-EP (2mm x 2mm x 0.8mm) and a 9-bump (1.2mm x 1.2mm) WLP.
- Parts Number: U6610
- Printed Number: MAX98300E
Compatible with :
- Pro Unibody 13 (A1278 / Early 2011 / Late 2011 / Mid 2012)
Audio Amplifier IC -
In stock
Pro Retina 13" (A1708)- The ISL6208 is a High Frequency, Dual MOSFET Driver, Optimized to Drive Two N-channel Power MOSFETs in a Synchronous-rectified Buck Converter Topology.
- It is Especially Suited For Mobile Computing Applications That Require High Efficiency And Excellent Thermal Performance.
- This Driver, Combined With an Intersil Multiphase Buck PWM Controller.
- Forms a Complete Single-stage Core-voltage Regulator Solution For Advanced Mobile Microprocessors.
High Voltage Synchronous Rectified Buck MOSFET Controller IC -
In stock
Pro Retina 13" (A1708)- Top Quality Synchronous Power Buck Controller IC for MacBooks (TI, CSD87330Q3D / 87330D / 873300 / 87330Q / 87330, QFN-8 Pin).
- Replace damaged or non-working Synchronous Power Buck Controller IC with this part for Macbooks.
- All Macbook Motherboard Parts are made from best quality materials.
- Ask for Professional Installation.
- Part Numbers: CSD87330Q3D.
- Printed Numbers: 87330D
- Pin Numbers: QFN-8 Pin
Synchronous Power Buck Controller IC -
In stock
Pro Retina 13" (A1708)- The TPS720 family of dual rail, low-dropout linear regulators (LDOs) offers outstanding performance (PSRR, load, and line transient response) while consuming a very low quiescent current of 38 µA..
- The TPS720 supports a novel feature in which the output of the LDO regulates under light loads when the IN pin is left floating
- The light-load drive current is sourced from VBIAS under this condition. This feature is particularly useful in power-saving applications where the DC-DC converter connected to the IN pin is disabled but the LDO is still required to regulate the voltage to a light load..
- The TPS720 is stable with ceramic capacitors and uses an advanced BICMOS fabrication process that yields a dropout of 110 mV at a 350-mA output load
- The TPS720 has the unique feature of providing a monotonic VOUT rise (overshoot limited to 3%) with VIN inrush current limited to 100 mA + ILOAD with an output capacitor of 2.2 µF...
- Parts Number: TPS720105DRVR, TPS720105
PMIC Voltage Linear Regulators Controller IC -
In stock
Pro Retina 13" (A1708)- Best Quality Power Management IC For MacBooks Pro Retina 13 (A1708).
- This Power Management IC control the voltage of power rail as well as to regulate voltage to the built-in flash storage.
- If Power Management IC is not working properly then Replace with our best quality Power Management IC for Macbooks.
- Port Number: ISL95828HRTZ,U7100.
- We Recommended for Professional Installation.
- Every Part is tested before Shipping.
Compatible with :
- Pro 13" Retina (A1708 / Late 2016 / Mid 2017)
Power Management IC
