Filter
Shopping Options
-
In stock
iPhone 7 Plus- This is High quality Battery Adhesive Tape Replacement for iPhone 7 Plus (10 Pack).
- This iPhone 7 Plus battery removal Tape if you are replacing your iPhone battery or the original Tape has been damaged.
- 100% fit your iPhone 7 Plus.
- Quality material and premium craftsmanship.
- Tested before shipping.
- Compatible with A1661 / A1784 / A1785 / A1786
Battery Adhesive Tape -
In stock
iPhone 7 Plus- Battery Flex Protective Tape For iPhone 7 Plus (20 Pack).
- When solving the battery pop-up problem, after installing the battery IC chip on the battery, use this insulating sticker to seal the tail of the battery board.
- Compatible with iPhone 7 Plus.
- Each item is tested before shipping.
- Compatible with A1661 / A1784 / A1785 / A1786
Battery Flex Protective Tape -
In stock
iPhone 7 Plus- Top Quality Waterproof LCD Adhesive seal for iPhone 7 Plus (White).
- This Adhesive seal will save your LCD from water damage, also it is used to hold LCD screen very tight.
- it's made from quality material and premium craftsmanship. Perfect fit on iPhone 7 Plus.
- We recommended for professional Installation.
- All Parts are tested before shipping.
- Compatible with A1661 / A1784 / A1785 / A1786
White -
In stock
iPhone 7 Plus- Top Quality Waterproof LCD Adhesive seal for iPhone 7 Plus (Black).
- This Adhesive seal will save your LCD from water damage, also it is used to hold LCD screen very tight.
- it's made from quality material and premium craftsmanship. Perfect fit on iPhone 7 Plus.
- We recommended for professional Installation.
- All Parts are tested before shipping.
- Compatible with A1661 / A1784 / A1785 / A1786
Black -
In stock
iPhone 8- This is iPhone 8 Complete Screw.
- If you lost a some screw from your screw set, then this is very useful.
- This is complete Screw set includes all screws needed for repairs on your iPhone 8.
- You can easily buy any product Osiris Parts.
- This screw set is suitable for iPhone 8.
Complete Screw Set -
Service Pack
In stock
iPhone 8- Top Quality Waterproof LCD Adhesive seal for iPhone 8 (Service Pack) (30 Pack) (White).
- This Adhesive seal will save your LCD from water damage, also it is used to hold LCD screen very tight.
- it's made from quality material and premium craftsmanship. Perfect fit on iPhone 8.
- We recommended for professional Installation.
- All Parts are tested before shipping.
- Compatible with A1863 / A1905 / A1906 / A1907
White -
Service Pack
In stock
iPhone 8- Top Quality Waterproof LCD Adhesive seal for iPhone 8 (Service Pack) (30 Pack) (Black).
- This Adhesive seal will save your LCD from water damage, also it is used to hold LCD screen very tight.
- it's made from quality material and premium craftsmanship. Perfect fit on iPhone 8.
- We recommended for professional Installation.
- All Parts are tested before shipping.
- Compatible with A1863 / A1905 / A1906 / A1907
Black -
In stock
iPhone 8- High-Quality 3M Glue Adhesive Tape (For Back Glass) For iPhone 8 (10 Pack).
- The adhesive is pre-cut to match all the exact shape of the iPhone 8 LCD and Touch Screen assembly so that you won't have to waste time measuring, cutting and aligning strips of adhesive.
- Factory-grade 3M adhesive ensures a strong solid bond to your iPhone 8 frame.
- Complete your repair like a pro with this clean, quick, affordable way to apply the adhesive your iPhone 8 repair will require.
3M Glue Adhesive Tape ( -
In stock
iPhone 8- This is High quality Battery Adhesive Tape Replacement for iPhone 8 (10 Pack).
- This iPhone 8 battery removal Tape if you are replacing your iPhone battery or the original Tape has been damaged.
- 100% fit your iPhone 8.
- Quality material and premium craftsmanship.
- Tested before shipping.
- Compatible with A1863 / A1905 / A1906 / A1907
Battery Adhesive Tape -
In stock
iPhone 8- Top Quality Waterproof LCD Adhesive seal for iPhone 8 (Black).
- This Adhesive seal will save your LCD from water damage, also it is used to hold LCD screen very tight.
- it's made from quality material and premium craftsmanship. Perfect fit on iPhone 8.
- We recommended for professional Installation.
- All Parts are tested before shipping.
Black -
In stock
iPhone 7 Plus- Top Quality Waterproof LCD Adhesive seal for iPhone 7 Plus (Black).
- This Adhesive seal will save your LCD from water damage, also it is used to hold LCD screen very tight.
- it's made from quality material and premium craftsmanship. Perfect fit on iPhone 7 Plus.
- We recommended for professional Installation.
- All Parts are tested before shipping.
- Compatible with A1661 / A1784 / A1785 / A1786
Black -
In stock
iPhone 7 Plus- High Quality Motherboard Heat Shield for iPhone 7 Plus (5 Piece Set / 10 Pack).
- Replace damaged Heat Shield with this part for iPhone 7 Plus.
- This shield plate is used to disperse heat and protect your LCD.
- It is made from best quality materials, perfect fit on iPhone 7 Plus.
- We Recommended for Professional Installation.
- Each item has been verified and in good condition before shipping
- Compatible with A1661 / A1784 / A1785 / A1786
Motherboard Heat Shield -
In stock
iPhone 7 Plus- High quality 3 in 1 Front Glass with Frame and OCA Pre-Installed for iPhone 7 Plus (White) (2 Pack) (OCA Master)
- The front glass with frame adds an extra layer of protection on device's screen, safeguarding it against scratches, cracks, and minor impacts.
- With the frame and OCA already in place, the installation process becomes hassle-free, allowing you to quickly and confidently replace your damaged or cracked iPhone 7 Plus screen.
- Each front glass panel is precisely cut and designed to match the dimensions of the specific model, ensuring perfect fit and alignment with the device.
- Crafted with high-quality materials.
- This replacement part offers the same level of durability and visual clarity as the iPhone screen.
- Compatible with A1661 / A1784 / A1785 / A1786
White3 in 1 (Front Glass + Frame + OCA Pre-Installed) -
In stock
iPhone 7 Plus- High quality 3 in 1 Front Glass with Frame and OCA Pre-Installed for iPhone 7 Plus (Black) (2 Pack) (OCA Master)
- The front glass with frame adds an extra layer of protection on device's screen, safeguarding it against scratches, cracks, and minor impacts.
- With the frame and OCA already in place, the installation process becomes hassle-free, allowing you to quickly and confidently replace your damaged or cracked iPhone 7 Plus screen.
- Each front glass panel is precisely cut and designed to match the dimensions of the specific model, ensuring perfect fit and alignment with the device.
- Crafted with high-quality materials.
- This replacement part offers the same level of durability and visual clarity as the iPhone screen.
- Compatible with A1661 / A1784 / A1785 / A1786
Black3 in 1 (Front Glass + Frame + OCA Pre-Installed) -
In stock
iPhone 6S- Best Quality Small Audio IC for iPhone 7 / 7 Plus (U3402 U3502, 338S00220, 42 Pins) (10 pack)
- This small Audio IC Chip controls Speaker and Microphone of a iPhone 7 / 7 Plus.
- This is the best replacement part of damage and cracked Small Audio IC for iPhone 7 / 7 Plus with this part.
- We recommended for Professional Installation
- iPhone 7 / 7 Plus designation: U3402 U3502
- Port Marking: 338S00220
- Number of Pins: 42
- It’s also known as: Small Audio IC Chip, Mini Audio IC Chip.
- Compatible with A1660 / A1661 / A1778 / A1779 / A1780 / A1784 / A1785 / A1786
Small Audio IC Chip -
In stock
iPhone 6S- Best Quality Big Audio IC Compatible For iPhone SE (2016) / iPhone 6S / 6S Plus / iPhone 7 / 7 Plus (U3500: U3101: 338S00105: 144 Pins) (Reballed) (10 Pack)
- This Big Audio IC Chip is used to control Speaker and Microphone of a iPhone 6S / 6S Plus / 7 / 7 Plus.
- This is the best replacement part of damage and cracked Big Audio IC for iPhone 6S / 6S Plus / 7 / 7 Plus.
- Professional Installation is required.
- iPhone 6S / 6S Plus designation: U3500
- iPhone 7 / 7 Plus Plus designation: U3101
- Port Marking: 338S00105
- Number of Pins: 144
- This Part is a bunch of 10 pack.
- Compatible with A1662 / A1633 / A1634 / A1660 / A1661
Big Audio IC -
In stock
iPhone 7- Best quality Small Power IC For iPhone 7 / 7 Plus (BBPMU_RF, PMD9645, 103 Pins / Qualcomm).
- A Power IC divide power and multiply certain voltage from one desired voltage source to any desired power output voltages.
- This is the best Replacement Part of damaged and non-working Small Power IC for iPhone 7 / 7 Plus.
- This Replacement Part is bunch of 10 Pack.
- iPhone 7 / 7 Plus designation: BBPMU_RF
- Port Marking: PMD9645
- Number of Pins: 103
- Highly recommend for professional installation.
- Every Part is tested before shipping.
Power Management IC (Small) -
In stock
iPhone 6S- Best Quality Big Audio IC for iPhone 6S / 6S Plus / 7 / 7 Plus (U3500 U3101, 338S00105, 144 Pins)
- This Big Audio IC Chip controls Speaker and Microphone of a iPhone 6S / 6S Plus / 7 / 7 Plus.
- This is the best replacement part of damage and cracked Big Audio IC for iPhone 6S / 6S Plus / 7 / 7 Plus.
- We Recommended for Professional Installation.
- iPhone 6S / 6S Plus designation: U3500
- iPhone 7 / 7 Plus Plus designation: U3101
- Port Marking: 338S00105
- Number of Pins: 144
- It’s also known as: Big Audio IC Chip.
- Compatible with A1662 / A1633 / A1634 / A1660 / A1661
BlackBig Audio IC -
In stock
iPhone 7- Top quality Front Camera FPC Connector For iPhone 7 / 7 Plus (J4503, 36 Pin).
- This FPC connector plays an important role to connect with Front Camera.
- This is the replacement part of damaged or non-working Front Camera FPC Connector for iPhone 7.
- We recommended for Professional Installation.
- iPhone 7 Designation: J4503
- Number of Pins: 36
- It’s also known as: Front Camera FPC Connector.
- Compatible with A1660 / A1778 / A1779 / A1780
Front Camera FPC Connector -
In stock
iPhone 7- Top quality Charging Port Flex FPC Connector For iPhone 7 / 7 Plus (J4101, 48 Pin)
- This FPC Connector is used to connect headphones and charging Port with mother board.
- Charging Port flex FPC replacement parts of damaged or non-working for iPhone 7 / 7 Plus.
- We recommended for Professional Installation.
- iPhone 7 / 7 Plus Designation: J4101
- Number of Pins: 48
- It’s Also Known as: Charging Port FPC Connector.
- Compatible with A1660 / A1661 / A1778 / A1779 / A1780 / A1784 / A1785 / A1786
Charging Port Flex FPC Connector -
In stock
iPhone 7- High Quality FPC Connector for iPhone 7 / 7 Plus (ForceTouch / Home Button Flex) (J3801, 24Pins).
- This FPC Connector is used to connect ForceTouch / Home Button Flex and motherboard.
- If Home Button is working Slow and unresponsive then replace FPC Connector (ForceTouch / Home Button Flex).
- We recommended for Professional Installation.
- iPhone 7 / 7 Plus Designation: J3801
- Number of Pins: 24
- It’s also known as: Home Button FPC Connector.
- Compatible with A1660 / A1661 / A1778 / A1779 / A1780 / A1784 / A1785 / A1786
Home Button FPC Connector -
In stock
iPhone 7- Best Quality Power/Volume Button Flex FPC Connector For iPhone 7 / 7 Plus (J4504, 14 Pin).
- FPC Connector is used to connect Power/Volume Button Flex with Motherboard.
- This is perfect replacement part of Damaged and non-working FPC Connector (Power/Volume Button) for iPhone 7 Plus.
- We Recommended for Professional Installation.
- iPhone 7 Plus Designation: J4504
- Number of Pins: 14
- It’s also known as: Power/Volume Button FPC Connector.
- Compatible with A1661 / A1784 / A1785 / A1786
Power / Volume Button Flex FPC Connector -
In stock
iPhone 7- Best Quality FPC connector For iPhone 7 / 7 Plus (GPS Flex) (TUNFX_RF, 14 Pins).
- FPC Connector is used to connect GPS Flex with Motherboard.
- This is perfect replacement part of Damaged and non-working FPC Connector (GPS Flex) for iPhone 7 / 7 Plus.
- We Recommended for Professional Installation.
- iPhone 7 / 7 Plus Designation: TUNFX_RF
- Number of Pins: 14
- It’s also known as: GPS FPC Connector.
- Compatible with A1660 / A1778 / A1779 / A1780
GPS Flex FPC Connector -
In stock
iPhone 8- High Quality Motherboard Heat Shield for iPhone 8 (3 Piece Set / 10 Pack).
- Replace damaged Heat Shield with this part for iPhone 8.
- This shield plate is used to disperse heat and protect your LCD.
- It is made from best quality materials, perfect fit on iPhone 8.
- We Recommended for Professional Installation.
- Each item has been verified and in good condition before shipping
- Compatible with A1863 / A1905 / A1906 / A1907
Motherboard Heat Shield -
In stock
iPhone 8- High quality 3 in 1 Front Glass with Frame and OCA Pre-Installed for iPhone 8 (White) (2 Pack) (OCA Master)
- The front glass with frame adds an extra layer of protection on device's screen, safeguarding it against scratches, cracks, and minor impacts.
- With the frame and OCA already in place, the installation process becomes hassle-free, allowing you to quickly and confidently replace your damaged or cracked iPhone 8 screen.
- Each front glass panel is precisely cut and designed to match the dimensions of the specific model, ensuring perfect fit and alignment with the device.
- Crafted with high-quality materials.
- This replacement part offers the same level of durability and visual clarity as the iPhone screen.
- Compatible with A1863 / A1905 / A1906 / A1907
White3 in 1 (Front Glass + Frame + OCA Pre-Installed) -
In stock
iPhone 8- High quality 3 in 1 Front Glass with Frame and OCA Pre-Installed for iPhone 8 (Black) (2 Pack) (OCA Master)
- The front glass with frame adds an extra layer of protection on device's screen, safeguarding it against scratches, cracks, and minor impacts.
- With the frame and OCA already in place, the installation process becomes hassle-free, allowing you to quickly and confidently replace your damaged or cracked iPhone 8 screen.
- Each front glass panel is precisely cut and designed to match the dimensions of the specific model, ensuring perfect fit and alignment with the device.
- Crafted with high-quality materials.
- This replacement part offers the same level of durability and visual clarity as the iPhone screen.
- Compatible with A1863 / A1905 / A1906 / A1907
Black3 in 1 (Front Glass + Frame + OCA Pre-Installed) -
In stock
iPhone 8- Best quality Tester Flex Cable for iTestBox (S200 / S300) For iPhone 8.
- Replace damaged Tester Flex Cable for iPhone 8.
- You could use this flex cable connect S300 box to test screens for iPhone 8 only
- All Parts are tested before shipping.
- It is made from good quality materials.
Tester Flex Cable -
In stock
iPhone 8- Best quality Laser Pod Protection Mold for iPhone 8.
- It is also known as Back Cover Housing Protect Mold.
- This Mold will protect the back housing from laser.
- One-piece mold, simple operation.
- Removing the back glass is now more convenient and faster.
- Reasonable working area, better removal of the back cover.
Laser Pod Protection Mold -
In stock
iPhone 8- Best quality Laser Machine Protection Mould for iPhone 8 (M-Triangel).
- Using this protection you can easily separate the iPhone back cover glass with the laser machine.
- Zero mistakes and efficient work.
- One-piece mold and simple operation.
- It made from Acrylic material, light and portable.
- Reasonable working area, better removal of the back cover.
Laser Machine Protection Mold -
In stock
iPhone 8- This is iScrews Position Mat for iPhone 8.
- It’s Very difficult to remember all Screws position of iPhone 8.
- If you don’t know the current position of iPhone 8 Screws than this iScrews Position Mat will help you.
- This is the complete screw map of iPhone 8.
BlackiScrews Position Mat -
In stock
iPhone 7- Best quality Compass IC For iPhone 7 / 7 Plus (U2402, 14Pins).
- This is the best Replacement Part of damaged and non-working Compass IC for iPhone 7 / 7 Plus.
- Compass IC depends on earth gravity and it shows the earth direction.
- Soldering skill are required, when you repair the parts..
- iPhone 7 / 7 Plus designation: U2402
- Number of Pins: 14
- It’s also known as: Compass IC Chip
Compass IC -
In stock
iPhone 7- Top Quality Crystal Baseband Oscillator IC for iPhone 7 / 7 Plus.
- Replace damaged and non-working Crystal Baseband Oscillator for iPhone 7 / 7 Plus with this part
- This Replacement part made from the best material and precision machining. Perfect fit on iPhone 7 / 7 Plus only.
- iPhone 7 / 7 Plus Designation: Y5501_RF
- It’s also known as: Crystal Oscillator.
Crystal Baseband Oscillator IC -
In stock
iPhone 7- Highest quality Baseband EEPROM IC for iPhone 7 / 7 Plus (EPROM_RF, 4 Pins).
- Excellent to replace your old damaged one, need professional skills to fit on motherboard.
- Great quality made from durable material with low weight.
- iPhone 7 / 7 Plus designation: EPROM_RF
- Number of Pins: 4 Pins
- It’s Also Known as: Baseband Eeprom IC Chip.
Baseband Eeprom IC -
In stock
iPhone 7- Best Quality USB Charging NX IC for iPhone 7 / 7 Plus.
- This is the best replacement part of damage and cracked USB Charging NX IC for iPhone 7 / 7 Plus.
- We Recommended for Professional Installation.
- iPhone 7 / 7 Plus Designation: Q2101
- Number of Pins: 9 Pins
- It’s also known as: USB Charging IC.
USB Charging NX IC -
In stock
iPhone 7- Top Quality Camera / Boost Power Supply IC For iPhone 7 / 7 Plus (U2301, 61280D, 16 Pins).
- Power Supply IC takes power from the battery and supplies to all other Replacement Parts of a Mobile Phone.
- Replace damage and non-working Camera / Boost Power Supply IC for iPhone 7 / 7 Plus with this one.
- Port Marking: U2301.
- Number of Pins: 16 Pins.
- Ask for Professional Installation.
Camera / Boost Power Supply IC -
In stock
iPhone 7- Top Quality Fingerprint Power Supply IC For iPhone 7 / 7 Plus.
- This Fingerprint Power Supply IC is used to manage Power Supply of Fingerprint Scanner.
- If Fingerprint is not working properly or damaged then replace with our high quality Fingerprint Power Supply IC.
- We recommend for professional installation.
- iPhone 7 / 7 Plus designation: U4805 U4806
- Number of Pins: 6 Pins
- It’s also known as: Fingerprint Power Supply IC Chip.
Fingerprint Power Supply IC -
In stock
iPhone 7- Best Quality Amplifier IC for iPhone 7 / 7 Plus (LBPA_RF, 78100, 57 Pins).
- This Amplifier IC is used to manage input data to output data.
- All Board Components are tested before shipping.
- iPhone 7 / 7 Plus Designation: LBPA_RF
- Port Marking: 78100
- Number of Pins: 57
- It’s Also Known as: Amplifier IC Chip.
Amplifier IC -
In stock
iPhone 6S- Top Quality Fingerprint Power Supply IC For iPhone 6S / 6S Plus / 7 / 7 Plus.
- This Fingerprint Power Supply IC is used to manage Power Supply of Fingerprint Scanner.
- If Fingerprint is not working properly or damaged then replace with our high quality Fingerprint Power Supply IC.
- We recommend for professional installation.
- iPhone 6S / 6S Plus designation: U4100
- iPhone 7 / 7 Plus designation: U3801
- Port Marking: LP5907SNX-2.75
- Number of Pins: 5
- It’s also known as: Fingerprint Power Supply IC Chip.
- Compatible with A1633 / A1634 / A1660 / A1661
Fingerprint Power Supply LDO IC -
In stock
iPhone 6S- Best Quality Charging Mosfet IC Chip for iPhone 6 / 6 Plus / 6S / 6S Plus.
- This charging IC is play an important role to charge Mobile.
- Replace damaged and non-working Charging Mosfet IC Chip with this part for iPhone.
- It’s Made from Quality Materials, Perfect Fit on iPhone 6 / 6 Plus / 6S / 6S Plus.
- We Recommended for Professional Installation.
- Port Number: Q2300, Q1403
- Port Marking: CSD68827W
- Number of Pins: 9 Pins
- It’s also known as: Charging IC chip.
- Compatible with A1633 / A1634 / A1660 / A1661
Charging Mosfet IC Chip -
In stock
iPhone 7- Good quality Back Camera Flex FPC Compatible For iPhone 7 / 7 Plus (J4501, 22 Pin).
- This FPC connector is used to connect motherboard and Back camera.
- It is the best FPC Connector Replacement part of cracked, damaged or non-working Back Camera Flex connector for iPhone 7 Plus.
- All Cell phone Board Component Parts are tested before Shipping.
- iPhone 7 Plus Designation: J4501
- Number of Pins: 22
- It’s Also Known as: Back Camera Flex FPC Connector.
- Compatible with A1661 / A1784 / A1785 / A1786
Back Camera Flex FPC Connector -
In stock
iPhone 7- Top quality Q4001 RV3CA01ZP For iPhone 7 / 7 Plus.
- Replace damaged Q4001 RV3CA01ZP for iPhone 7 / 7 Plus with this part.
- We recommended for Professional Installation.
- iPhone X Designation: Q4001
- Number of Pins: 3 Pins
- All parts are tested before shipping.
Q4001 RV3CA01ZP -
In stock
iPhone 7- Top Quality Motor Vibrator Driver IC For iPhone 7 / 7 Plus.
- This is the best Replacement Part of damaged and non-working Motor Vibrator IC For iPhone 7 / 7 Plus.
- Vibrator IC is play an important role for iPhone vibration.
- We recommended for Professional Installation.
- iPhone 7 / 7 Plus designation: U3602
- Port Marking: ICE5LP4K
- Number of Pins: 36
- It’s also known as: Vibrator Driver IC Chip
Motor Vibrator Driver IC -
In stock
iPhone 7- Best Quality Antenna Switch IC Chip for iPhone 7 / 7 Plus.
- Antenna Switch IC is used manage your antenna signal.
- Replace damaged Antenna Switch IC Chip for iPhone 7 / 7 Plus with this part.
- We recommended for Professional Installation.
- Port Number: LBDSM_RF
- Port Marking: 289 LT.
- Number of Pins: 21 Pins
- It’s Also called Antenna IC.
Antenna Switch IC Chip -
In stock
iPhone 7- Best quality Camera Flash Driver IC for iPhone 7 / 7 Plus.
- If your mobile flash camera is not working it means Camera Flash IC is damaged .
- Replace damaged and non-working Camera Flash IC for iPhone 7 / 7 Plus with this part.
- All Cell phone Board Component Parts are tested before Shipping.
- iPhone X Designation: M2600
- Number of Pins: 100 Pins
- It’s Also Known as: Camera Flash Driver IC Replacement.
Camera Flash IC -
In stock
iPhone 6 Plus- High quality Camera LDO IC For iPhone 5S / 6 / 6 Plus / 7 / 7 Plus (U210 U2301 U2501, LP5907UVX, 4 Pins).
- This Camera LDO IC is used to manage output voltage of Camera.
- It is best Replacement Part of broken or damaged Camera LDO IC for iPhone 5S / 6 / 6 Plus / 7 / 7 Plus.
- This Part requires soldering and professional skills to fit on motherboard.
- This Replacement Part is made from durable material with low weight.
- iPhone 5s designation: U210
- iPhone 6 / 6 plus designation: U2301
- iPhone 7 / 7 plus designation: U2501
- Port Marking: DH, LP5907UVX
- Number of Pins: 4
- It’s also known as: Camera LDO IC Chip.
BlackCamera LDO IC -
In stock
iPhone 7- Top Quality 24 crystal for iPhone 7 / 7 Plus.
- This Crystal 24.00 is helpful for clock of iPhone.
- Replace damaged and non-working 24 crystal for iPhone 7 / 7 Plus with this part
- This Replacement part made from the best material and precision machining. Perfect fit on iPhone 7 / 7 Plus only.
- iPhone 7 / 7 Plus Designation: Y0700
- Number of Pins: 4 Pins
- It’s also known as: 24 crystal.
Crystal 24.00
