Filter
Shopping Options
-
In stock
iPhone XS- New Technology Glass With Frame & OCA Pre-Installed For iPhone XS (Premium Quality / 3in1) (Pack of 1).
- No Need To Use Loca Glue To Repair Your Front Glass Any More, Frame And Oca Glue Pre-Installed.
- All You Need Is Remove Your Lcd And Clean It Up , Peel The Protective Sheet Over The Oca Glue .
- Hot Melt Glue Used To Secure The Frame To The Glass Better Than Double Sided Tapes, It Won’t Lift Up Couple Days After.
- Compatible with iPhone XS.
2 in 1 With Frame Included (Front Glass + OCA Pre-Installed) -
In stock
iPhone XS- High quality 4 in 1 Frame Included (Front Glass + OCA + Long Touch + OCA Pre-Installed) for iPhone XS (OCA Master).
- The front glass with frame adds an extra layer of protection on device's screen, safeguarding it against scratches, cracks, and minor impacts.
- With the frame and OCA already in place, the installation process becomes hassle-free, allowing you to quickly and confidently replace your damaged or cracked iPhone XS screen.
- Each front glass panel is precisely cut and designed to match the dimensions of the specific model, ensuring perfect fit and alignment with the device.
- Crafted with high-quality materials.
- This replacement part offers the same level of durability and visual clarity as the iPhone screen.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100
4 in 1 With Frame Included (Front Glass + OCA + Short Touch + OCA Pre-Installed) -
In stock
iPhone XS- Best quality LCD Frame Without Glue Replacement For iPhone XS (10 Pack).
- This Frame comes without glue.
- Replace damaged LCD Frame with our replacement part for iPhone XS.
- This Replacement part made from the best material. 100% fit on iPhone XS.
- All Parts are tested before shipping.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100
-
In stock
iPhone XS- High Quality Frame Only Replacement For iPhone XS (10 Pack).
- This replacement part is to repair your damaged mid-section chassis in your iPhone XS.
- This frame is the assembly that your digitizer and glass attaches to.
- We highly recommended for professional Installation.
- All Parts are tested before Shipping.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100
Frame -
In stock
iPhone X- Best quality Camera Flash Driver IC 2 for iPhone X.
- If your mobile flash camera is not working it means Camera Flash IC is damaged .
- Replace damaged and non-working Camera Flash IC for iPhone X with this part.
- All Cell phone Board Component Parts are tested before Shipping.
- iPhone X Designation: U4210
- It’s Also Known as: Camera Flash Driver IC Replacement.
- Compatible with A1921 / A1920 / A1865 / A1984
Camera Flash Driver IC 2 -
In stock
iPhone XS- Best Quality JLAT1 Antenna FPC Connector For iPhone XS / XS Max (JUAT-1).
- JUAT-1 FPC Connector is used to connect Antenna cable to Motherboard.
- Replace damaged or non-working JUAT-1 Antenna FPC Connector with our best quality Part for iPhone XS / XS Max.
- We Recommended for Professional Installation.
- Port Designation: JUAT-1
- Number of Pins: 14
- It’s also known as: iPhone Antenna Connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Antenna FPC Connector -
In stock
iPhone X- Best quality Camera Flash Driver IC 1 for iPhone X.
- If your mobile flash camera is not working it means Camera Flash IC is damaged .
- Replace damaged and non-working Camera Flash IC for iPhone X with this part.
- All Cell phone Board Component Parts are tested before Shipping.
- iPhone X Designation: U4100
- It’s Also Known as: Camera Flash Driver IC Replacement.
- Compatible with A1865 / A1920 / A1921 / A1984
Camera Flash Driver IC 1 -
In stock
iPhone XS- Best quality Loudspeaker FPC Connector For iPhone XR (J-UAT2, 12 Pin).
- This FPC Connector is used to connect Loudspeaker and Motherboard.
- Repair/Replace old, damaged and faulty Loudspeaker Connector for iPhone XR with this replacement Part.
- We recommended for Professional Installation.
- iPhone XR Designation: J-UAT2
- It’s Also Known as: iPhone Loudspeaker FPC connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Signal Antenna Interface Seat -
In stock
iPhone XS- Top quality Receiver Range Inductor Environment Light Sensor Microphone FPC Connector For iPhone XS/XS Max (J4600, 28 Pin).
- This Replacement part is used to replace damaged Receiver Range Inductor Environment Light Sensor Microphone FPC Connector with this one.
- it’s made from quality material and precision machining. Perfect fit on iPhone XS / XS Max only.
- Each item has been verified and in good condition before shipping
- Part Number: J4600.
- It’s also known as: iPhone FPC Connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Receiver Range Inductor Environment Light Sensor Microphone FPC Connector -
In stock
iPhone XS- Great Quality Volume Button Flex FPC Connector For iPhone XS / XS Max (J3500, 4 Pin)
- This Volume Button FPC Connector is used to connect volume button to motherboard.
- Replace damaged or non-working Volume Button FPC Connector with our replacement part for iPhone XS / XS Max.
- Port Destination: J3500
- Ask for Professional Installation.
- Every Part is tested before Shipping.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Volume Button Flex FPC Connector -
In stock
iPhone XS- Best quality FPC Connector for iPhone XS / XS Max (Loudspeaker).
- This FPC Connector is used to connect Loudspeaker and Motherboard.
- Repair/Replace old, damaged and faulty Loudspeaker Connector for iPhone XS / XS Max with this replacement Part.
- We recommended for Professional Installation.
- iPhone XS / XS Max Designation: JLAT-A
- It’s Also Known as: iPhone Loudspeaker FPC connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Loudspeaker FPC Connector -
In stock
iPhone XS- Best quality Battery Flex FPC Connector For iPhone XS / XS Max (J3200, 4 Pin).
- This FPC Connector is used to connect Battery and Motherboard.
- Repair/Replace old, damaged and faulty Battery Connector for iPhone XR with this replacement Part.
- We recommended for Professional Installation.
- iPhone XS / XS Max Designation: J3200
- Number of Pins: 4
- It’s Also Known as: iPhone Battery FPC connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Battery Flex FPC Connector -
In stock
iPhone XS- Best Quality Lattice Projector Face ID FPC Connector For iPhone XS / XS Max (J4500, 10 Pin).
- This FPC Connector is used to connect Lattice Projector Face ID Cable to Motherboard.
- Replace damaged or non-working Lattice Projector Face ID FPC Connector with our best quality Part for iPhone XS / XS Max.
- We Recommended for Professional Installation.
- Port Designation: J4500
- It’s also known as: iPhone Face id fpc Connector.
- Each item has been checked and in good condition before shipping.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Lattice Projector Face ID FPC Connector -
In stock
iPhone X- Best Quality Lattice Projector Face ID FPC Connector For iPhone X (J4530, 18 Pin).
- This FPC Connector is used to connect Lattice Projector Face ID to Motherboard.
- Replace damaged and non-working Lattice Projector Face ID for iPhone X with our best replacement part.
- All Logic Components are tested before shipping.
- iPhone X Designation: J4530
- It’s Also Known as: Face ID FPC connector.
- Compatible with A1921 / A1920 / A1865
Lattice Projector Face ID FPC Connector -
In stock
iPhone X- Best Quality 3D Touch FPC Connector For iPhone X (J5800, 28 Pin).
- This FPC Connector is used to connect Touch ID to Motherboard.
- Replace damaged and non-working Touch id FPC Connector for iPhone X.
- All Logic Components are tested before shipping.
- iPhone X Designation: J5800
- Number of Pins: 28
- It’s Also Known as: Touch Id FPC connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104 / A1865 / A1901 / A1902 / A1903
3D Touch FPC Connector -
In stock
iPhone XS- Top quality Rear Telephoto Camera FPC Connector For iPhone XS/XS Max (J4000, 26 Pin).
- If your iPhone Rear Telephoto Camera can not connect with motherboard than you need to replace FPC Connector.
- This FPC connector is used to connect with Rear Telephoto Camera to motherboard.
- This is the replacement part of damaged or non-working Rear Telephoto Camera FPC Connector for iPhone XS / XS Max.
- Port Destination: J4000
- We recommended for Professional Installation.
- It’s also known as: Rear Camera FPC Connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Rear Telephoto Camera FPC Connector -
In stock
iPhone XS- Top quality Rear Wide Angle Camera FPC Connector For iPhone XS/XS Max (J3900, 26 Pin).
- If your iPhone Rear Wide Angle Camera can not connect with motherboard than you need to replace FPC Connector.
- This FPC connector is used to connect with Rear Wide Angle Camera to motherboard.
- This is the replacement part of damaged or non-working Rear Wide Angle Camera FPC Connector for iPhone XS / XS Max.
- Port Destination: J3900
- We recommended for Professional Installation.
- It’s also known as: Rear Camera FPC Connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Rear Wide Angle Camera FPC Connector -
In stock
iPhone XR- Best quality Charging Coil For iPhone XS / XS MAX / XR (L3301/L3302/L3303/L3304).
- New Replacement Wireless Charging Antenna to replace a broken/defective charging pad for iPhone XS / XS MAX / XR.
- Repair wireless charge functionality to iPhone XS / XS MAX / XR.
- We recommended for Professional Installation.
Charging Coil -
In stock
iPhone 8 Plus- Top Quality, Power Boost IC for iPhone X.
- This IC Chip is used to boost Power
- Replace damaged Power Boost IC for iPhone X with our replacement part.
- iPhone X Designation: U3100
- Port Marking: SN61280E
- Number of Pins: 16 Pin
- We are highly recommended for professional installation.
- Compatible with A1864 / A1865 / A1920 / A1921
Power Boost IC -
In stock
iPhone XS- Best Quality LCD FPC Connector For iPhone XS / XS Max (J5700, 34 Pin).
- LCD FPC replacement parts for iPhone XS / XS Max to replace damaged or non-working touch panel flex connector.
- This FPC connector For iPhone XS / XS Max LCD plays an important role in transferring the information between the LCD Display and the logic board, if the LCD Screen of your iPhone XS / XS Max blank screen, black screen or vertical line on the screen while the LCD Screen in good condition with the appearance, you may need to check if the metal pin on the connector cracked, or the flex cable connector loosen.
- All Board Component are tested before shipping.
- Port Number: J5700
- It’s Also Known as: FPC connector (LCD).
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
-
In stock
iPhone XS- Top quality Charging Port Flex FPC Connector For iPhone XS / XS Max (J6400, 48 Pin).
- This FPC Connector is used to connect charging Port with mother board.
- Best Replacement Part of damaged Charging Port FPC connector for iPhone XS / XS Max.
- We recommended for Professional Installation.
- iPhone XR Designation: J6400
- Number of Pins: 48
- It’s Also Known as: Charging Port FPC Connector.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1921 / A2101 / A2102 / A2103 / A2104
Charging Port Flex FPC Connector -
In stock
iPhone 8- Best Quality Wireless Charging Charger IC Chip for iPhone 8 / 8 Plus
- This Wireless Charging Charger IC is used to manage wireless charging.
- This is the best replacement part of non-working wireless charging charger IC chip for iPhone 8 /8 Plus with this part.
- We recommended for Professional Installation
- iPhone 8 / 8 Plus designation: U3400
- It’s also known as: Wireless charger IC Chip.
- Compatible with A1863 / A1864 / A1865 / A1920 / A1921 / A1984
Wireless Charger IC Chip -
In stock
iPhone X- This Chestnut Display Driver/Boost IC has a built-in high efficiency boost regulator.
- Unused sinks are disabled by tying them to ground. The boost output automatically adjusts its voltage to the WLED forward voltage to improve efficiency.
- This stobe/flash driver/boost IC supports multiple brightness dimming methods.
- iPhone X / XS / XSMAX designation: U5600
- Port Marking: 65730AOP
- It’s also known as: Chestnut Display Driver / Boost IC.
- Compatible with A1865 / A1920 / A1921
Display Driver Chestnut Controller IC -
In stock
iPhone XR- Great Quality Small Power IC Replacement for iPhone XS / XS MAX / XR (6829).
- This Small Power IC is used to Manage power in IC Chips.
- Replace damaged or non-working Small Power IC with our best quality IC for iPhone XS / XS MAX / XR.
- Port Destination: 6829
- Ask for Professional Installation.
- Every Part is tested before Shipping.
- Compatible with A1920 / A1921 / A1984
Small Power IC -
In stock
iPhone XR- Best Quality Big Power IC for iPhone XS / XR (338S00383-A0).
- This Big Power IC is used to manage unregulated input voltage and provide a regulated output voltage.
- Big Power IC is the best Replacement part of damage and non-working Power IC for iPhone XS / XR.
- It’s Made from Quality Materials, Perfect Fit on iPhone XS / XR.
- We Recommended for Professional Installation.
- Port Marking: 38S00383-A0
- It’s also known as: Power IC.
- Compatible with A1920 / A1997 / A2098 / A2097 / A2100 / A1984 / A2105 / A2106 / A2107 / A2108
Big Power IC -
In stock
iPhone XS- Best quality Tester Flex Cable for iTestBox (S200 / S300) For iPhone XS.
- Replace damaged Tester Flex Cable for iPhone XS.
- You could use this flex cable connect S300 box to test screens for iPhone XS only
- All Parts are tested before shipping.
- It is made from good quality materials.
Tester Flex Cable -
In stock
iPhone X- high quality Charging Port Tester Cable For iPhone X / XS / XS Max.
- An extended Flex cable for connecting the Charging Port to motherboard.
- This Tester Cable is used to test Charging Port, just to find out your Charging Port is damaged or defect before installing.
- Tester Cable can save your time to fix damage Charging Port.
- All Parts are Tested before Shipping.
- Compatible with A1865 / A1920 / A1921
Tester Cable (Charging Port) -
In stock
iPhone XS- Good quality LCD Assembly Tester Cable replacement for iPhone XS / XS Max.
- An ideal replacement for damaged or non-functional Tester cable.
- This tester cable can check the functionality of LCD Assembly without device disassembly.
- Save installation time.
- Made with superior quality materials and perfectly fit on specific device..
- Compatible with A1921 / A2101 / A2102 / A2103 / A2104 / A1920 / A1997 / A2098 / A2097 / A2100
-
In stock
iPhone XS- high-quality Back Camera Tester Cable for iPhone XS / XS Max
- An extended Flex cable for connecting the Front Camera to motherboard.
- This cable is used to test Front Camera, just to find out your Front Camera is damaged or defect before installing.
- This Front Camera Tester Cable for iPhone XS / XS Max will save you more time for testing front Camera.
- This Product Compatible with iPhone XS / XS Max.
Tester Cable (Back Camera) -
In stock
iPhone XS- Best quality QianLi Middle Frame Reballing Platform for iPhone X/XS/XS Max.
- This Middle Frame Reballing Platform is for iPhone X/XS/XS Max motherboard soldering tool.
- This Middle Frame Reballing Platform is for iPhone X/XS/XS Max logic board dissembling and assembling testing tool.
- This Middle Frame Reballing Platform is for iPhone X/XS/XS Max Separating.
Middle Frame Reballing Platform -
In stock
iPhone XS- Qianli Metal Middle Frame Reballing Platform (IP-01) For iPhone X / XS / XS Max
- QianLi 3 IN 1 iPhone Middle Frame Reballing Platform for iPhone X / XS / XS Max motherboard soldering tool.
- QianLi iPhone Middle Frame Reballing Platform for iPhone X / XS / XS Max logic board dissembling and assembling testing tool..
- QianLi Middle Frame Reballing Platform for iPhone X / XS / XS Max Separating.
Metal Middle Frame Reballing Platform (IP-01) -
In stock
iPhone XSModule (iPhone X/XS/XS MAX BOARD SEPARATION) (Sunshine Model # SST12A-X3)
- • Size: 126*72*18
- • Net Weight: 339g
- • Configuration: Heating base, digital Heating regulator, five-core,
- • We have always insisted on High and low slot design, only Heating the middle column, without heating the CPU.
- • Silicone insulation, high temperature resistance, lowering the temperature of the bottom contact surface.
-
In stock
iPhone XS- Best quality Laser Machine Protection Mould for iPhone XS (M-Triangel).
- Using this protection you can easily separate the iPhone back cover glass with the laser machine.
- Zero mistakes and efficient work.
- One-piece mold and simple operation.
- It made from Acrylic material, light and portable.
- Reasonable working area, better removal of the back cover.
Laser Machine Protection Mold -
In stock
iPhone XS- This is iScrews Position Mat for iPhone XS.
- It’s Very difficult to remember all Screws position of iPhone XS.
- If you don’t know the current position of iPhone X Screws than this iScrews Position Mat will help you.
- This is the complete screw map of iPhone XS.
iScrews Position Mat -
In stock
iPhone XR- Specially designed for the high-end smartphones in the communications industry.
- especially for the iPhone X series layered mainboard performance is more excellent.
- Not easy to de-weld, moderate viscosity, not east to shift solder joints are bright and full, no false solder joints, no residue, high wettability and excellent weldability. .
iSoldering XP Low Temperature 148 Degree Solder Paste -
In stock
iPhone XS- MECHANIC FXS001 0.01mm Fingerprint Chip Link Wire Insulate Jump Line.
- Ideal for running jumpers on circuit board.
- Insulated Jumper wire to avoid shorting with other components.
- Suitable for Electronics, iPhone and Android cellphone logic board repair.
Jump Wire Insulation 0.01MM X 200M -
In stock
iPhone XR- Mechanic i Soldering XW Low Temperature 138° Welding Wire for iPhone X / Xs / XR / Xs Max. .
- No odor, no smoke, no irritating odor, nontoxic and harmless.
- Hight conductivity and thermal conductivity, high purity. .
- Lead free environmentally friendly tin wire.
- Diameter: 0.5mm/0.6mm for choose.
iSoldering XW Low Temperature Welding Wire (138 Degree) -
In stock
iPhone XR- Good quality Stencil from Qianli Bumblebee Stencil (QS05) For iPhone XR / XS / XS Max .
- Square holes round angle BGA stencils.
- Sturdy precise and durable over time.
- Now with a new treatment and with new materials, even easier to use even more precise.
Bumblebee Stencil (QS05) -
In stock
iPhone XS- Best Quality Qianli iCopy-S Double Side Chip Test Frame for iPhone X / XS / XS Max.
- 4 in 1 Double-side chip test frame.
- This frame is for read, write program logic chip, Intel, and Qualcomm baseband chip.
- All Parts are quality tested before shipping.
iCopy-S Double Side Chip Test Frame
